Features and benefits:

Right-hand seat.
Complies with Planning Guide for Accessible Restrooms.
Foam-padded, white, water-resistant Naugahyde seat 1½" (38 mm) thick, with enclosed ½″ (13 mm) plywood base.
Frame and mounting brackets are type 304 stainless steel and have a self-locking mechanism.
Supports up to 360 lbs (163 kg) when properly installed.
Seat 32 7/8″ (835 mm) wide and projects 22 11/16″ (575 mm) from the wall.

Safety instructions:

Shower seats are no stronger than the anchors and walls to which they are attached and must be firmly secured in order to support the loads for which they are intended. Consult and comply with local building codes. To avoid potential injury, the building owner or maintenance personnel should remove the shower seat from service if the shower seat is not adequately secured to the wall. In the interests of safety and the protection of end users, this seat should not be used to support weights exceeding 360lbs (163 kg). To avoid potential seat malfunction, DO NOT use seat if weight exceeds 360 lbs (163 kg). Failure to abide by this warning may result in seat malfunctioning, potentially causing minor to moderate injury.