With only one coat needed, it cures in as little as 4-5 hours, to allow for same-day flooring installation. It is colored blue for visual assurance of coverage during application. Additionally, shot blasting may not be required before application*, and the 2-part system has zero VOC, to contribute to LEED^® project points.

LiquiDam is a low viscosity, high penetrating, two-part 100% solids epoxy. It has a moisture vapor emission rate (MVER) less than or equal to 25 lbs. per 1,000 ft2 per 24 hours (0.12 kg/m² per 24 hours) or a maximum relative humidity RH of 100%. It is designed to reduce the MVER to less than 3 lbs. per 1,000 ft² per 24 hours (0.015 kg/m² per 24 hours).

Product Features

Only one coat needed
Cures within 4-5 hours for same day flooring installation
Can be applied directly to green concrete up to 100% RH
Meets ASTM F3010 product requirements for moisture mitigation systems under resilient floor coverings
Less than 0.10 Perm Rating (ASTM E96)
Pot life of 25 minutes
Coverage rate of 180 ft2 per blended gallon (3.7 m2/L)
Low VOC

*On clean, sound concrete. Refer to the product data sheet for details.