Durezinc i90
Verified by manufacturer over a year ago
High performance solvent borne inorganic zinc silicate.
Application
- Can be used on bridge structures, interiors and exteriors of petroleum storage tanks, bulk handling terminals, chemical and industrial plants.
- It can also be used on shipping facilities and offshore platforms.
- Service life may be extended or a decorative finish can be provided by overcoating with an epoxy, chlorinated rubber, acrylic or polyurethane protective coating.
Description
DUREZINC™i90 is a two-component, self-curing inorganic zinc silicate formulated for heavy-duty corrosion protection in the most aggressive industrial and marine environments. Some of its significant features include:
- Cures to hard, tough coating that resists damage during transport.
- Heavy-duty cathodic protection for steel in corrosive marine environment.
- Can withstand the most severe weathering conditions.
- High zinc content.
- Compatible with a range of protective coatings.
- Good impact and abrasion resistance when fully cured.
General information
Material | Inorganic zinc silicate. |
Uniclass | |
SpeedSpec | 05100 Structural Steel 09910 Painting |
SpecPack | 05100 Structural Steel 09910 Painting |
NATSPEC National Classification System | 0671 Painting 0345 Steel – Protective Paint Coatings |
Specification data - Solvent-based matt and flat finishes
Standard | To AS/NZS 3750.15 type 4 & SSPC-Paint 20 level 1. |
Composition | Two component, solvent based inorganic zinc silicate. |
Sheen | Matt. |
Colour | Grey. |
Execution | Aairless spray.Conventional spray. |
Coverage | 7.0 m²/L. Guidance for specification option: Varies depending on application method, ambient conditions, surface porosity and roughness. Due to the porous nature of zinc silicate coatings it is not possible to directly relate practical spreading rate with theoretical volume solids as is common with conventional coatings. Refer to product data sheet. |
Drying time | 4 days (full curing). |
Dry film thickness | 75 microns. |
VOC | < 490 g/L. |
Resistance | Manufacturer guidanceRefer to product data sheet for resistance guide. |
Surface | Abrasive blast cleaned steel. |