EdgeWRAP Protector - Corner Covers, Corner Protection, Guards

EdgeWRAP is a flexible polyurethane foam edge protection system designed to reduce the risk of head, limb and body injuries caused by exposed steel beams, sharp corners and structural edges within industrial environments.

In many warehouse, manufacturing and logistics facilities, structural elements such as steel columns, racking frames, mezzanine structures and low beams can present a collision hazard for pedestrians. EdgeWRAP provides a simple and effective way to highlight these hazards while cushioning accidental impact.

Manufactured from durable polyurethane foam, the protector absorbs contact energy and reduces the severity of injuries if personnel come into contact with exposed edges or corners. The highly visible black and yellow chevron finish clearly highlights hazards within operational environments, helping workers and visitors recognise potential impact points before contact occurs.

EdgeWRAP is particularly suitable for protecting exposed structural edges located along pedestrian routes or below head height, where the risk of accidental collision is increased.

Supplied in convenient 1 metre lengths, EdgeWRAP sections can be easily cut or mitred on-site to suit specific installation requirements. Integrated 3M self-adhesive fixing strips allow for fast installation on a wide range of surfaces including steelwork, coated timber and other structural materials commonly found within industrial buildings.

Features and Benefits

• Manufactured from flexible polyurethane foam designed to cushion accidental contact with exposed edges and corners.
• Highly visible black and yellow chevron finish highlights structural hazards and improves workplace awareness.
• Helps reduce the risk of head, limb and body injuries caused by exposed steel beams, corners and structural edges.
• Quick and simple installation using integrated 3M self-adhesive strips.
• Self-adhesive backing adheres securely to a variety of surfaces including steel, coated timber and other structural materials.
• Supplied in convenient 1 metre lengths for flexible installation.
• Sections can be cut or mitred on-site using a sharp knife or fine saw to suit specific installation layouts.
• Available in five profile shapes designed to accommodate a wide range of structural edges and corner configurations.
• Lightweight and low-maintenance protective solution.
• Fire tested and approved to DIN 4102 B2.
• Durable polyurethane foam construction designed for long-term industrial use.

EdgeWRAP Profile Options

EdgeWRAP is available in five profile configurations designed to suit different structural edge shapes and installation requirements.

EdgeWRAP A – EW-40-A

Cut-out circular profile designed to wrap around rounded or tubular edges.

• Light Duty EdgeWRAP A
• Length: 1000 mm
• Self-adhesive fixing strips included

EdgeWRAP B – EW-40-B

Push-fit circular profile suitable for installation around round structural elements.

• Light Duty EdgeWRAP B
• Length: 1000 mm
• Self-adhesive fixing strips included
• Cut-out dimensions: 20 × 8 mm

EdgeWRAP C – EW-40-C

Semi-circular profile designed to protect flat edges and beam corners.

• Light Duty EdgeWRAP C
• Length: 1000 mm
• Self-adhesive fixing strips included
• Flat edge dimension: 32 mm

EdgeWRAP D – EW-6020-D

Rectangular profile designed to protect square edges and structural corners.

• Light Duty EdgeWRAP D
• Length: 1000 mm
• Self-adhesive fixing strips included

EdgeWRAP E – EW-40-E

Push-fit trapeze profile designed for installation around irregular edge shapes.

• Light Duty EdgeWRAP E
• Length: 1000 mm
• Self-adhesive fixing strips included
• Cut-out dimensions: 20 × 8 mm

Hazard Identification and Workplace Safety

Within industrial environments, exposed edges located along pedestrian routes can present a significant injury risk if left unprotected.

Structural elements such as steel beams, mezzanine frameworks, racking frames and machinery supports can all create sharp or hard impact points that may cause injury during accidental contact.

EdgeWRAP helps mitigate these risks by providing both visual hazard identification and cushioned impact protection.

The black and yellow chevron pattern is widely recognised within industrial environments as a warning indicator, drawing attention to potential hazards and encouraging safer movement within the workplace.

Edge protection is particularly important for structural elements located below approximately 2100 mm, where personnel may be at risk of head or upper body impact.

Installation

EdgeWRAP has been designed for fast and straightforward installation.

Each section is supplied with integrated 3M self-adhesive fixing strips, allowing the protector to be applied directly to prepared surfaces without the need for additional mechanical fixings.

Installation typically involves:

• Cleaning the installation surface
• Removing the protective backing from the adhesive strips
• Positioning the EdgeWRAP section onto the exposed edge
• Applying firm pressure to secure the protector

The foam sections can be trimmed or mitred on-site using a sharp knife or fine saw, allowing installers to adapt the product to suit complex edge configurations.

Typical Installation Locations

EdgeWRAP foam edge protection can be installed on a wide range of structural elements including:

• Steel beams and columns
• Mezzanine structures
• Machinery frames
• Warehouse racking edges
• Door frames and structural openings
• Low steel supports within pedestrian routes
• Structural corners within industrial environments

By cushioning impact points and highlighting hazards, EdgeWRAP helps reduce the likelihood of injury in busy operational environments.

Summary

EdgeWRAP provides a simple, durable and highly visible solution for protecting personnel from injury caused by exposed structural edges and corners within industrial environments.

Its flexible polyurethane foam construction cushions accidental impact while the black and yellow chevron finish clearly highlights potential hazards within pedestrian routes.

With multiple profile options, integrated adhesive fixing and easy on-site cutting, EdgeWRAP offers a practical and cost-effective way to improve workplace safety across warehouses, manufacturing facilities and logistics operations.