Intustrap®
Verified by manufacturer over a year ago
High pressure intumescent wrap.
Application
lntustrap® has been designed to allow thermally insulated copper pipes to pass through fire walls and floors, without the need to cut away the thermal insulation to maintain the compartment FRL.
Simply cut the required length of lntustrap®, wrap it twice around the thermally lagged pipe where it passes through the fire compartment. Then fire stop around the perimeter of the lntustrap® using lntubatt® and lntumastic.
In addition, lntustrap® has been tested around small PVC and HOPE pipes and is installed in the same manner as above. For specific applications and FRLs please refer to the referenced Compliance Reports. Must be installed in strict accordance with the construction details contained within the compliance reports.
Description
TBA Firefly lntustrap® is a high pressure intumescent wrap, which comes in a 25 meters long coil, easily cut to the required length using a long bladed Stanley knife. Used to wrap around thermally lagged copper pipes and small PVC /HOPE Pipes. In a fire the intumescent will expand to replace the gap left by the thermal insulation and plastic pipes as they melt away/break down, maintaining the full integrity/insulation of the fire seal.
General information
Warranty description | 25 year |
Uniclass | |
NATSPEC National Classification System | 0182 Fire-Stopping |
SpeedSpec | 07810 Fireproofing |
SpecPack | 07810 Fireproofing |
Specification data - Flexible intumescent gap seals
Standard | To AS 4072.1 and AS 1530.4. |
Fire resistance level | -/180/180. |
Size | 25 000 l x 60 w (mm). |
Thicknesses | 4 mm. |
Certification | Tested both horizontally and vertically. AS1530.4-2014 certified. AS4072.1-2005 certified. |
Similar products from TBA Firefly
Intuspan