LYSAGHT KLIP-LOK 700 HI-STRENGTH® (COLORBOND® Steel & ZINCALUME® Steel)
Verified by manufacturer over a year ago
ZINCALUME® Steel
ZINCALUME® Steel
An advanced concealed fix roof cladding with pronounced ribs.
Application
- Ideal for residential, commercial and industrial applications.
- Suitable for long length roofing application.
- Ideal for spring curving.
- Available in rolled-on-site lengths via mobile roll forming capability.
AUSTRALIAN STANDARDS
Published load capacity data is derived from testing in accordance with:
- AS 4040.0 – 1992
- AS 4040.1 – 1992
- AS 4040.2 – 1992
- AS 4040.3:2018
Published Limit state capacities are suitable to determine structural adequacy and serviceability in accordance with:
- AS/NZS 1170.0:2002 Structural design actions, Part 0: General principles –
- AS/NZS 1170.1:2002 (Reconfirmed 2016) Structural design actions, Part 1: Permanent, imposed and other actions –
- AS/NZS 1170.2:2011 (Reconfirmed 2016) Structural design actions, Part 2: Wind actions –
- AS/NZS 1170.3:2011 (Reconfirmed 2016) Structural design actions, Part 3: Snow and ice actions.
Published installation guidelines align with AS 1562.1:2018 Design and Installation of sheet and wall cladding
Lysaght steel products comply with:
- AS 1397-2011 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium –
- AS/NZS 2728:2013 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements –
- AS 1397-2011 which defines the coating types and classes and steel grades for hot dip metallic coated steel.
Description
Klip-Lok 700 Hi-Strength® features a substantial, bold rib rising from a wide, fluted pan. Design with long straight lines and uses a concealed fixing system for uninterrupted lines and superb water-tightness. Some of its significant features include:
- Achievable thermal expansion of long straight runs.
- Concealed fixed cladding with no exposed fasteners offering weather-tightness.
- Can
- With fixing clip that can accommodate up to 100mm of insulation.
- Roof spans consider both resistance to wind pressure and light roof traffic.
- Available in rolled-on-site lengths.
- Onsite manufacturing available via mobile roll forming capability.
- Minimum roof slope at 1°.
Only available in QLD, NSW, ACT & VIC
General information
Color | Manufacturer guidanceWide range of colours are available. Check with the manufacturer. |
Material | COLORBOND® Steel. ZINCALUME® Steel. |
Size | 700 mm (cover width). |
Warranty description | Manufacturer guidanceCovered by BlueScope material performance warranties. |