NBS Source
I'm a manufacturer
Compare variants

Shadowline® WA Cyclonic (COLORBOND® Steel)

Verified by manufacturer over a year ago

ZINCALUME® Steel

Fielders Variant:

Roofing and walling profile with two pans. Available in WA only.

Jump to:
+61 8 8292 3611 Website

Application

Suitable for both roofing and walling applications. Available in Western Australia only. For availability in other regions, contact local manufacturer.


AUSTRALIAN STANDARDS

 

Published load capacity data is derived from testing in accordance with:

  •       AS 4040.0:1992.
  •       AS 4040.1:1992.
  •       AS 4040.2:1992.
  •       AS 4040.3:2018.

 

Published Limit state capacities are suitable to determine structural adequacy and serviceability in accordance with:

  •       AS/NZS 1170.0:2002 Structural design actions, Part 0: General principles.
  •       AS/NZS 1170.1:2002 (Reconfirmed 2016) Structural design actions, Part 1: Permanent, imposed and other actions.
  •       AS/NZS 1170.2:2011 (Reconfirmed 2016) Structural design actions, Part 2: Wind actions.
  •       AS/NZS 1170.3:2011 (Reconfirmed 2016) Structural design actions, Part 3: Snow and ice actions.

 

Published installation guidelines align with AS 1562.1:2018 Design and Installation of sheet and wall cladding.

 

Fielders steel products comply with:

  •       AS 1397:2011 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium.
  •       AS/NZS 2728:2013 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements.
  •       AS 1397:2011 which defines the coating types and classes and steel grades for hot dip metallic coated steel.

Description

Shadowline® WA is a roofing and walling profile with two pans. Its panels can be button punched or pierced-fixed, depending on desired use. Some of its features include:

  • Can be used down to a minimum of one degree pitch for roof decks.
  • Can be fixed horizontally or vertically as wall cladding.
  • Rolled to any transportable length.
  • Available in a wide array of finishes and colours.

General information

Material

Steel.

Shape

Rectangle

Warranty description

-

Manufacturer guidance

Covered by BlueScope material warranties, subject to project assessment and terms and conditions.

Uniclass

Pr_25_71_51_89 Steel profiled sheetPrimary

SpeedSpec

07610 Roofing and Roof Plumbing

07462 Cladding External Walls

NATSPEC National Classification System

0436 Cladding – Profiled and Seamed Sheet Metal

0423 Roofing – Profiled Sheet Metal

SpecPack

07600 Metal Roofing, Siding and Roof Plumbing

Specification data - Steel profiled sheet

Standards

To AS 1397 and AS/NZS 2728.

Grade

G300.

Coating class

AM125.

Base Metal thickness (BMT)

0.70 mm.

Guidance for specification option:

Total Coated Thickness of 0.75 mm.

Manufacturer guidance

Indicated Total Coated Thickness (TCT) is based on standard COLORBOND®, single-sided material.

Profile

-

Form

Standing seam profile.

Height

48 mm.

Cover width

305 mm.

Manufacturer guidance

Provide manufacturing tolerance of ±5 mm.

Colour

Standard ZINCALUME steel colour.

Finish

Zinc-coated.

Material

ZINCALUME® steel.

Length

-

Manufacturer guidance

Sheets are supplied custom cut to length to suit project requirements. Transportation limits apply.


To address thermal expansion and contraction, recommended maximum sheet lengths are 24 m for roofing and 15 m for walling applications. Where lengths exceed 24 m, step joints or concealed decks are recommended.


Provide manufacturing tolerances of ±10 mm in length and ±5 mm in width.

Span

450 mm.

600 mm.

900 mm.

1200 mm.

1500 mm.

Show more

Manufacturer guidance

Varies depending on building height, profile thickness and span type.


Maximum recommended spans for buildings less than 5 m high are:

  • For Region C roofing: 740 – 1800 mm.
  • For Region C walling: 980 – 2090 mm.
  • For Region D roofing: 450 – 1800 mm.
  • For Region D walling: 550 – 1900 mm.


Maximum recommended spans for buildings 5 to 10 m high are:

  • For Region C roofing: 640 – 1800 mm.
  • For Region C walling: 840 – 1900 mm.
  • For Region D roofing: 380 – 1750 mm.
  • For Region D walling: 420 – 1900 mm.

Cyclonic performance

To AS/NZS 1170.2:2011 and AS 4040.1-1992.

Thermal expansion

2.9 mm average per 5.0 m.

Manufacturer guidance

Computed at 50° C change.

Frame or support

Steel (1.0 to 3.5 mm).

Guidance for specification option:

  • If button punched, use 10g-16 x 16 mm Wafer Head Tek screws.
  • If pierced-fixed, use 14g-10 x 25 mm Hex Head Tek screws.

Timber Hardwood.

Guidance for specification option:

  • If button punched, use 10g-12 x 25 mm Wafer Head Type 17 screws.
  • If pierced-fixed, use 14g-10 x 25 mm Hex Head Type 17 screws.

Timber Softwood.

Guidance for specification option:

  • If button punched, use 10g-12 x 25 mm Wafer Head Type 17 screws.
  • If pierced-fixed, use 14g-10 x 25 mm Hex Head Type 17 screws.

Steel Battens (0.55 to 1.0 mm).

Guidance for specification option:

  • If button punched, use 10g-16 x 16 mm Wafer Head Tek screws.
  • If pierced-fixed, use 14g-10 x 25 mm Hex Head Tek screws.

Manufacturer guidance

Refers to recommended supports and fasteners if product is to be installed without insulation.

Mass

9.53 kg/m² (COLORBOND® steel).

9.36 kg/m² (ZINCALUME® steel).

Insulation

-

Manufacturer guidance

When insulation thickness up to 50 mm are installed, screws may need to be increased in number depending on insulation thickness and density.


When insulation is required, Fielders® recommends the use of a thermal spacer.

Installation

Button punched.

Pierced-fixed (for walling installations only).

Sustainability data

Country of material origin

Australia

Country of product manufacture

Australia

Recyclability

100% Recyclable.

© 2024 NBS Enterprises Ltd. All rights reserved.