Rapidur® EB5 Rapid Drying Sand/ Cement Levelling Floor Screed - Rapid Drying Cement Levelling Screed
Verified by manufacturer 3 days ago
Rapid drying and pneumatically pumpable fibre-reinforced sand and cement levelling floor screed featuring Sopro Rapidur® EB5 screed accelerator.
Application
Suitable for floors in homes, offices, public buildings and places exposed to similar loads. May be applied as a levelling screed directly onto a load bearing floor, unbonded on a separating barrier (polythene) or a floating floor. Can be covered early with floor finishes such as tiles, linoleum, parquet, cork or carpet.
Description
Rapidur® EB5 Rapid Drying Sand/ Cement Floor Screed is a pneumatically pumpable, high-quality, rapid drying, levelling floor screed material based on sand, cement and Sopro Rapidur® EB5 screed accelerator.
Features and benefits:
- Factory produced on site.
- Rapid drying and fibre-reinforced.
- Allowing early use of screed.
- Allowing early floor covering installations.
- Bonded, unbonded and floating floor screed constructions.
- Suitable for underlayment in wet areas.
- BS 8204-1 ISCR Categories A, B and C.
General information
Color | Other |
Finish | Other |
Material | Cement Sand Other |
Shape | Formless |
Length | Bespoke |
Width | Bespoke |
Height | Bespoke |
Uniclass | |
CAWS | M10/7 Proprietary quick drying levelling screeds M10/130 Proprietary quick drying levelling screeds |
Specification data - Quick-drying levelling screed mixes
Classification data | |
Product reference | Rapidur® EB5 Rapid Drying Sand/ Cement Levelling Floor Screed. |
Cement | Portland. |
Fine aggregate | Sand. |
Admixture | Sopro Rapidur® EB5 screed accelerator. |
Fibre reinforcement | Manufacturer's standard. |
Mix | Manufacturer' standard. |
Standards | To EN 13813. To BS 8204-1. To DIN 18560. |
Type | To EN 13813, CT–C30–F5. |
Minimum thickness | Guidance for specification option: To BS 8204-1:
To DIN 18560:
With Underfloor Heating, minimum thickness + mm diameter of UFH pipe. (i.e. minimum thickness floating + 16 mm). Insert requirements. |
Density | Wet density: 2100 kg/m³. Dry density: 1800 kg/m³. Guidance for specification option: Wet density: 2.1 kg/mm/m². Dey density: 1.8 kg/mm/m². |
Reaction to fire | A1, non-combustible. |
ThermalConductivity | To EN 12424, 1.0 W/mK. |
Drying time | Hardening time (before foot traffic): 12 hours (under ambient conditions). Drying time: 3–5 days. Guidance for specification option: Drying time: After 3–5 days for subsequent tiling; after achievement of residual moisture content ≤ 1.8% CM for other floor coverings, e.g. linoleum, PVC etc. and wood or parquet floorin |
Technical characteristics, other | In-situ crushing resistance to BS 8204-1, Category A, B, C. |
Sustainability data
Material | Cement Sand Other |
Literature
Literature type
Rapidur® EB5 Rapid Drying Sand / Cement Levelling Floor Screed - Data Sheet
ASBP Membership Certificate_SMET_valid until May 26
BES 6001 Responsible Sourcing of Products
BSI Certificate of Registration ISO 14001:2015
BSI Certificate of Registration ISO 45001:2018
BSI Certificate of Registration ISO 9001:2015
Corporate and Social Responsibility Statement Policy | Smet Building Products Ltd
Flowing Screed Assoc Cert 2025 - Smet Building Products Ltd
Irish Green Building Council Membership Cert _Smet Building Products Ltd_ valid until 26
Responsible Sourcing Policy | Smet Building Products Ltd
SMET Floor Screed and Compounds Product Selector
SMET Professional Tiling Systems Brochure
SMET -Tiling Onto Calcium Sulphate Floor Screed | System I
SMET -Tiling Onto Calcium Sulphate Floor Screed | System II
UKGBC_Member Certificate - Smet Building Products Ltd_valid until 26
Case studies
20,000m2 Rapidur® B5 Binder | B Doherty Screeding Services | National Mental Health Hospital Portrane
Irish Life Campus Redevelopment | 7000 m2 Rapidur EB5 Rapid Screed | Walls.ie
National School Ardee 2200 m2 EB5 Rapid Screed at 80 mm