Roofing

Self-adhesive elastomeric bitumen air and vapour control layer (AVCL), with an aluminium foil facing.

Elastomer bitumen air & vapour control layer, self adhesive membrane.

Self-adhesive SBS elastomeric bitumen air and vapour control layer (AVCL).

Cold applied liquid membrane system for thermally insulated flat roofs.

BEMO Aluminium Standing Seam roof system with Aluminium halters and Bar & bracket system on a structural deck.

BEMO Aluminium Standing Seam roof system with Aluminium halters on a liner deck.

BEMO Aluminium Standing Seam with GFK thermal halter on a structural deck.

BEMO Aluminium Standing Seam roof system with GFK thermal halter on a liner deck.

BEMO Aluminium Standing Seam roof system with aluminium halter on a liner deck Broof(t4).

Two-layer, torch-applied, inverted roof, bitumen inverted roof system, incorporating inverted insulation and torch-on bitumen capping sheet, with self-adhered bitumen underlayer.

Two-layer, torch-applied, inverted roof, bitumen membrane waterproofing system suitable for both new build and refurbishment applications and used primarily on concrete decks.

Bitumen cold roof system, incorporating torch-on bitumen capping sheet with self-adhered bitumen underlayer.

Liquid applied maintenance coating for metal roof refurbishment.

Self-adhesive SBS elastomeric bitumen underlayer.

Self-adhesive SBS elastomeric bitumen underlayer.

A self-adhesive SBS elastomeric bitumen capsheet and detailing capsheet, with mineral finish.

Elastomer bitumen, torch-on underlayer.

Elastomer bitumen, torch-on underlayer.

A torch-applied dual formulation APP plastomeric top and SBS elastomeric bottom, modified bitumen capping sheet.

A self-adhesive SBS elastomeric bitumen capsheet and detailing capsheet, with mineral finish.

Icopal Universal consists of a POCB (polyolefin copolymerisate binder) reinforced with glass fibre and polyester. The result is a strong, flexible, and extremely stable single layer roof covering that is UV resistant and tough.Icopal Universal can be applied rapidly to insulation materials, timber, concrete or profiled metal roofs, or to existing bituminous roofing systems. The three variations of Icopal Universal meet a wide range of applications:Icopal Universal - can be mechanically fixed, loose laid and ballasted.Icopal Universal SA - self adhesive membrane making detailing easy and safe.Icopal Universal WS - resistant to root penetration making it ideal for green roof applications.Icopal Universal does not require open flame, making it extremely safe to apply. The thin fleece of polypropylene used to prevent rolls from sticking together also makes Icopal Universal easy to use.Icopal Universal has an expected lifetime of up to 30 years, yet remains easy to remove and recycle at the end of its useful life. In addition, the thin design results in the minimal use of raw materials in manufacture and energy for transportation.Mechanically Fastened System:The Universal mechanically fastened system relies on the use of fasteners and pressure plates installed at pre-determined centres within the overlap to attach the roofing system to the structure. The system offers fast application time, instant seam strength and reduced impact associated with inclement weather conditions. Icopal Universal POCB membrane is mechanically attached through to the structural deck using Monarplan Tubular Fasteners of appropriate length. The fasteners are required to penetrate through the structural deck with a minimum projection to the underside of 25 mm.Fully Adhered System:Icopal Universal POCB adhered system offers an ideal solution on very complex building shapes or where drilling and mechanical fasteners are inappropriate or impractical.Ballasted System:Icopal Universal POCB adhered system offers an ideal solution on very complex building shapes or where drilling and mechanical fasteners are inappropriate or impractical but can support the increased loading from the ballast material.Components:Primer.Vapour control layer.Insulation: Thermazone Roofboard.Waterproof membrane, 3.2 mm.

Concrete half round ridge tiles.

Clay roof tile.

Interlocking concrete slate effect roof tile with dummy bond line.

Ridge fixing system.

GRP Bonding Strips for high and low profile roof tiles.

Verge system.

Concrete double interlocking pantile.

Ornamental clay tiles manufactured in the Midlands.

Cloaked verge system.

Concrete hip tile.

Clay half round ridge tile.

Clay hip tiles.

Clay angled valley tiles.

Concrete third round hip tiles.

Concrete angle hip tiles.