Fastening of composite roof and wall panels in single operation.

SFS Group Fastening Technology Ltd's composite panel fasteners are made from A4 austenitic stainless steel. They are dual threaded, with 5.5 mm diameter threads into the purlin/ rail and an enlarged outer sheet support thread of 7 mm diameter, immediately below a thread free section.

The head is available in the industry standard 8 mm hex head and Irius® head.

The enlarged thread of 7 mm diameter provides support for the weather-sheet against concentrated loads.

To prevent over-torqueing there is a thread free section behind the washer. These features combine with the sealing element below to achieve an airtight and water tight connection.

Features and benefits:

• Self drilling fastener with spin free zone under head for fixing of composite panels in single operation.
• Soft EPDM washer and double top thread supports top sheet to ensure weather sealing even if over driven.
• High bending capacity for absorption of thermal expansion of the sandwich panel outer-skin.
• High tension resistance achieved by optimized fastener geometry.

Sealing element:

The sealing element comprises of a light grey EPDM which is 3mm thick and designed to achieve an air tight and water tight connection. The EPDM sealing element is permanently bonded (vulcanized) to a 1 mm austenitic stainless steel conical shaped backing washer.

Approvals:

The SXC-A4 Fasteners are ETA approved (ETA number 13-183) and are CE marked. Technical performance in terms of tensile and shear are all documented in the ETA to enable the engineer to determine safe working loads in accordance with EuroNorms.