NBS Source
I'm a manufacturer

Compare variants

Traditional Textures  Precoated Aluminium Fully Supported Snaplock ® Standing Seam Roofing & Cladding - Standing Seam Roofing/ Cladding
Traditional Textures  Precoated Aluminium Fully Supported Snaplock ® Standing Seam Roofing & Cladding - Standing Seam Roofing/ Cladding

Verified 3 months ago

Metal Solutions Limited

Traditional Textures Snaplock® Seam 25 mm

Verified 3 months ago

Metal Solutions Limited

Traditional Textures Snaplock® Seam 38 mm

Summary
Snaplock ® precoated aluminium standing seam suitable for fully supported roofing and cladding applications, also suitable as a dormer roof covering
Snaplock ® precoated aluminium standing seam suitable for fully supported roofing and cladding applications, also suitable as a dormer roof covering
Application

Suitable for roofing and cladding systems. Also makes an excellent durable dormer roof finish.

Installation:

A list of approved installers is available on request by postcode

Email :

alan@metalsolutions.uk.com

Suitable for roofing and cladding systems. Also makes an excellent durable dormer roof finish.

Installation:

A list of approved installers is available on request by postcode

Email :

alan@metalsolutions.uk.com

Description

The Snaplock ® aluminium standing seam system is extensively used in Europe and the United States of America, where the system has proved itself in the extremely varied climate. The system gives an aesthetically pleasing finish whilst avoiding the industrial finishes found in other seam systems. Suitable for roofing and cladding systems. Also makes an excellent durable dormer roof finish. Some finishes are available with integrated factory fitted thin film Flextron solar.


Features and benefits:

  • Manufactured from lightweight corrosion resistant aluminium.
  • Material A1/A2 fire-rated dependent on the finish chosen.
  • Seams are available in 25 mm or 38 mm formats, in recoated aluminium which captures the colour pigments and textures of real zinc and copper cladding. It has a long life, is lightweight, is easy to work and is eco-friendly.
  • The Snaplock® seam system can be laid on a ventilated timber substrate, composite panel or direct on insulation, using special warm roof fixing clips.
  • Snaplock® is much simpler and requires less skill/ hand tools than the traditional standing seam. The profile contains an undercloak and an overcloak – the undercloak side is fixed with a stainless steel fixing clip with the overcloak side then snapped into place.
  • The system can be provided as a complete roof kit including all flashing, matching rainwater products and ancillaries.
  • Resistance to cracking on rapid deformation to EN 13523-5 and ASTM D 2749: No cracking, no loss of adhesion.
  • Resistance to cracking on bending to EN 13523-7 and ASTM D 870: Very good flexibility (0.5T).
  • Water immersion (and humidity) resistance to EN 13523-9/ 25 and ASTM D 870/ 2247: 3,000 h.


Substructure:

Snaplock® can be mounted on all roof build-ups, the only pre-requisite being that it is fully supported.

Suitable substructure materials:

  • Ventilated 18 mm-thick weather and boil proof (WPB) plywood.
  • Ventilated oriented strand board OSB3.
  • Composite panel.
  • Rigid insulation.
  • Profiled metal deck.


Underlay:

ISO-Mat Pro® underlay is recommended for cold roof applications.

ISO-Mat Metal® underlay is recommended for warm roof applications.

Available from:

roofing-tools.com


Clips:

  • 25 mm seam: SM-EH-Snap-25 (SM-EDH-Snap-25 for fixing to rigid insulation).
  • 38 mm seam: SM-EH-Snap-38 (SM-EDH-Snap-38 for fixing to rigid insulation).
  • Flashing clips: SM-ELH-27.

Available from:

roofing-tools.com

The Snaplock ® aluminium standing seam system is extensively used in Europe and the United States of America, where the system has proved itself in the extremely varied climate. The system gives an aesthetically pleasing finish whilst avoiding the industrial finishes found in other seam systems. Suitable for roofing and cladding systems. Also makes an excellent durable dormer roof finish. Some finishes are available with integrated factory fitted thin film Flextron solar.


Features and benefits:

  • Manufactured from lightweight corrosion resistant aluminium.
  • Material A1/A2 fire-rated dependent on the finish chosen.
  • Seams are available in 25 mm or 38 mm formats, in recoated aluminium which captures the colour pigments and textures of real zinc and copper cladding. It has a long life, is lightweight, is easy to work and is eco-friendly.
  • The Snaplock® seam system can be laid on a ventilated timber substrate, composite panel or direct on insulation, using special warm roof fixing clips.
  • Snaplock® is much simpler and requires less skill/ hand tools than the traditional standing seam. The profile contains an undercloak and an overcloak – the undercloak side is fixed with a stainless steel fixing clip with the overcloak side then snapped into place.
  • The system can be provided as a complete roof kit including all flashing, matching rainwater products and ancillaries.
  • Resistance to cracking on rapid deformation to EN 13523-5 and ASTM D 2749: No cracking, no loss of adhesion.
  • Resistance to cracking on bending to EN 13523-7 and ASTM D 870: Very good flexibility (0.5T).
  • Water immersion (and humidity) resistance to EN 13523-9/ 25 and ASTM D 870/ 2247: 3,000 h.


Substructure:

Snaplock® can be mounted on all roof build-ups, the only pre-requisite being that it is fully supported.

Suitable substructure materials:

  • Ventilated 18 mm-thick weather and boil proof (WPB) plywood.
  • Ventilated oriented strand board OSB3.
  • Composite panel.
  • Rigid insulation.
  • Profiled metal deck.


Underlay:

ISO-Mat Pro® underlay is recommended for cold roof applications.

ISO-Mat Metal® underlay is recommended for warm roof applications.

Available from:

roofing-tools.com


Clips:

  • 25 mm seam: SM-EH-Snap-25 (SM-EDH-Snap-25 for fixing to rigid insulation).
  • 38 mm seam: SM-EH-Snap-38 (SM-EDH-Snap-38 for fixing to rigid insulation).
  • Flashing clips: SM-ELH-27.

Available from:

roofing-tools.com

Product certifications
Color
Black, Blue, Bronze, Copper, Gold, Green, Grey, Orange, Silver, Other
Black, Blue, Bronze, Copper, Gold, Green, Grey, Orange, Silver, Other
Finish
Matt
Matt
Material
Aluminium
Aluminium
Length
13000 mm
13000 mm
Width
425 mm, 386 mm
425 mm, 386 mm
Height
25 mm, 38 mm
25 mm, 38 mm
Warranty description
20 year
20 year

Specification

Classification data
Standards
-
-
Sheet roofing products
To EN 13523-5 and ASTM D 2749. To EN 13523-7 and ASTM D 870. To EN 13523-9/ 25 and ASTM D 870/ 2247.
To EN 13523-5 and ASTM D 2749. To EN 13523-7 and ASTM D 870. To EN 13523-9/ 25 and ASTM D 870/ 2247.
Grade
Manufacturer's standard.
Manufacturer's standard.
Temper
Manufacturer's standard.
Manufacturer's standard.
Chemical composition and form
Manufacturer's standard.
Manufacturer's standard.
Width
425 mm (25 mm seam).
386 mm (38 mm seam).
Factory finishes
Matt.
Matt.
Thickness
0.7 mm., 0.8 mm.
0.7 mm., 0.8 mm.
Reaction to fire
-
-
External face
To EN 13501, A1.
To EN 13501, A1.

Additional properties

Length
-
-
Seam
25 mm.
38 mm.
Colour
Blue Zinc Patina., Copper Metallic., Copper Oxide., Copper Patina., Corten., Dark Zinc Patina., Graphite Patina., Green Zinc Patina., Inca Gold., Red Zinc Patina., Zinc Patina., RAL 7016, Anthracite grey., Bronze Natural (Uncoated), Anthracite Matt., Black Matt., Other RAL colours.
Blue Zinc Patina., Copper Metallic., Copper Oxide., Copper Patina., Corten., Dark Zinc Patina., Graphite Patina., Green Zinc Patina., Inca Gold., Red Zinc Patina., Zinc Patina., RAL 7016, Anthracite grey., Bronze Natural (Uncoated), Anthracite Matt., Black Matt., Other RAL colours.
Coating thickness (minimum)
50 µm (three coats).
50 µm (three coats).
Durability
To NF EN 1396, Class 4.
To NF EN 1396, Class 4.

Sustainability data

Contains Red List materials
No
No
Country of material origin
France
France
Country of product manufacture
United Kingdom
United Kingdom
Manufacturing plant location
Sofa St, Bolton BL1, UK
Sofa St, Bolton BL1, UK
Material
Aluminium
Aluminium
A1–A3 ('Production stage')

Embodied carbon as defined in BS EN 15804

Lower emissions

Lower emissions

Normalized unit
6.16 kg CO₂ eq/kg
6.16 kg CO₂ eq/kg
Declared unit
6.16 kg CO₂ eq/kg

Certified

6.16 kg CO₂ eq/kg

Certified

Recyclability
90%
90%
Recycled content
92 %
92 %