• Impact Mat 100 and Impact Mat 300 are particularly suitable for floor upgrades when looking to improve sound reduction on stairs and under engineered floors.  To be used over floorboards for conversions, refurbishments or listed buildings requiring minimal structural change.
• Impact Mat 200 is suitable for use as a single layer or double layer over floorboards or concrete decks for conversions, refurbishments or listed buildings requiring minimal structural change with a new plasterboard or existing lath and plaster ceiling. A single layer can also be used draped over joists and beneath floorboards. 

• Impact Mat 100 and Impact Mat 300 are particularly suitable for floor upgrades when looking to improve sound reduction on stairs and under engineered floors.  To be used over floorboards for conversions, refurbishments or listed buildings requiring minimal structural change.
• Impact Mat 200 is suitable for use as a single layer or double layer over floorboards or concrete decks for conversions, refurbishments or listed buildings requiring minimal structural change with a new plasterboard or existing lath and plaster ceiling. A single layer can also be used draped over joists and beneath floorboards. 

• Impact Mat 100 and Impact Mat 300 are particularly suitable for floor upgrades when looking to improve sound reduction on stairs and under engineered floors.  To be used over floorboards for conversions, refurbishments or listed buildings requiring minimal structural change.
• Impact Mat 200 is suitable for use as a single layer or double layer over floorboards or concrete decks for conversions, refurbishments or listed buildings requiring minimal structural change with a new plasterboard or existing lath and plaster ceiling. A single layer can also be used draped over joists and beneath floorboards. 

Isocheck Impact Mat acoustic flooring systems are designed for high levels of impact sound reduction through timber floors and staircases where an acoustic test is accepted for this type of system. (Not all authorities will accept a test on a soft floor covering when laid on a structural timber floor).

Isocheck Impact Mat 100 is a 6.5 mm thick layer of Isolate R which will provide impact improvement. Isocheck Impact Mat 300 is a 12 mm tri-layer system with an Isopoli core. Impact Mat 200 consists of an 8 mm Isofiba/ barrier mat composite and can be used as a single or double layer.

When installed and accepted as part of a complete party floor construction all systems enable a timber floor to meet the sound transmission standards of Approved Document E 2003 and subsequent amendments in 2004, 2010, 2013 and 2015.

Isocheck Impact Mat acoustic flooring systems are designed for high levels of impact sound reduction through timber floors and staircases where an acoustic test is accepted for this type of system. (Not all authorities will accept a test on a soft floor covering when laid on a structural timber floor).

Isocheck Impact Mat 100 is a 6.5 mm thick layer of Isolate R which will provide impact improvement. Isocheck Impact Mat 300 is a 12 mm tri-layer system with an Isopoli core. Impact Mat 200 consists of an 8 mm Isofiba/ barrier mat composite and can be used as a single or double layer.

When installed and accepted as part of a complete party floor construction all systems enable a timber floor to meet the sound transmission standards of Approved Document E 2003 and subsequent amendments in 2004, 2010, 2013 and 2015.

Isocheck Impact Mat acoustic flooring systems are designed for high levels of impact sound reduction through timber floors and staircases where an acoustic test is accepted for this type of system. (Not all authorities will accept a test on a soft floor covering when laid on a structural timber floor).

Isocheck Impact Mat 100 is a 6.5 mm thick layer of Isolate R which will provide impact improvement. Isocheck Impact Mat 300 is a 12 mm tri-layer system with an Isopoli core. Impact Mat 200 consists of an 8 mm Isofiba/ barrier mat composite and can be used as a single or double layer.

When installed and accepted as part of a complete party floor construction all systems enable a timber floor to meet the sound transmission standards of Approved Document E 2003 and subsequent amendments in 2004, 2010, 2013 and 2015.