Suitable for use in electrical sockets, water supply boxes and fire sealing services.

Astro PFP FR Putty seal is an easy to apply fire and sound rated sealant supplied as a non-setting putty. The putty is hand workable, reusable and re-serviceable due to its non-setting properties. The putty is manufactured and supplied in different shapes and forms for different applications.

Putty Pads for sockets:

When electrical sockets and switches are installed in dry lining partitions, the original fire rating of the partition is compromised. Fitting Putty Pads will reinstate the fire rating of the partition for up to 90 minutes (depending on the partition fire rating) preventing the passage of smoke, flames, sound and air through the electrical socket.

Putty Cords for fire sealing services:

The putty chord is designed to seal small gaps (0-10mm wide) around service penetrations where it is difficult to use traditional intumescent sealant and backers in terms of access and maintaining correct depths of seal.

Putty Pads for water supply boxes:

When tap water wall boxes are installed in dry lining partitions, the original fire rating of the partition is compromised. Fitting Putty Pads will reinstate the fire rating of the partition for up to 90 minutes (depending on the partition fire rating) preventing the passage of smoke, flames, sound and air through the electrical socket.

Features and benefits:

• Supplied in different shapes and forms for multiple application areas.
• CE/UKCA marked certified for UK and European markets.
• Installation is very simple and quick.
• Stops penetration of both cold and hot smoke.
• Self-adhesive and very easy to apply without tools.
• Unaffected by moisture; can be used in wet rooms.
• Never hardens and ensures a tight fit.
• Can be reshaped to other sizes if necessary.
• Provides excellent sound insulation.
• Environmentally and user friendly; contains no solvents.
• Contains a low pressure intumescent for optimal fire protection.
• Patented solution (Putty Cord).
• 90 minutes fire resistance in 100mm & 130mm dry wall construction. Tested to EN 1366-3:2004 in conjunction with additional guidelines from BS:EN 1364-1.
• Air pressure test up to 1000Pa (pass).