Can be used as a vertical edge trim with wall tiles or horizontally with floor tiles, or as a feature strip in wall or floor applications.

1. Select TDG according to tile thickness. 
2. Trowel tile adhesive over the area that forms the perimeter of the tiled covering. 
3.  Press the perforated anchoring leg of the profile into the tile adhesive and align, mechanical fix if required 
4. Trowel additional adhesive over the perforated anchoring leg to ensure full coverage. 
5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile - the profile should not be higher than the tiled surface, but rather up to approx. 1 mm lower. 
6. Fill the joint completely with grout. 

Can be used as a vertical edge trim with wall tiles or horizontally with floor tiles, or as a feature strip in wall or floor applications.

1. Select TDG according to tile thickness. 
2. Trowel tile adhesive over the area that forms the perimeter of the tiled covering. 
3.  Press the perforated anchoring leg of the profile into the tile adhesive and align, mechanical fix if required 
4. Trowel additional adhesive over the perforated anchoring leg to ensure full coverage. 
5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile - the profile should not be higher than the tiled surface, but rather up to approx. 1 mm lower. 
6. Fill the joint completely with grout. 

Can be used as a vertical edge trim with wall tiles or horizontally with floor tiles, or as a feature strip in wall or floor applications.

1. Select TDG according to tile thickness. 
2. Trowel tile adhesive over the area that forms the perimeter of the tiled covering. 
3.  Press the perforated anchoring leg of the profile into the tile adhesive and align, mechanical fix if required 
4. Trowel additional adhesive over the perforated anchoring leg to ensure full coverage. 
5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile - the profile should not be higher than the tiled surface, but rather up to approx. 1 mm lower. 
6. Fill the joint completely with grout. 

An alternative to ordinary straight edge profile, the TDG offers a finish to any edge. It can be used as a vertical edge trim on wall tiles or horizontally with floor tiles, or as a feature strip in wall or floor applications. The extruded aluminium profile gives a square appearance when installed with a slight bevelled edge for a smooth finish, and is available with corner pieces (ECG) to obviate sharp edges when mitring is required.

An alternative to ordinary straight edge profile, the TDG offers a finish to any edge. It can be used as a vertical edge trim on wall tiles or horizontally with floor tiles, or as a feature strip in wall or floor applications. The extruded aluminium profile gives a square appearance when installed with a slight bevelled edge for a smooth finish, and is available with corner pieces (ECG) to obviate sharp edges when mitring is required.

An alternative to ordinary straight edge profile, the TDG offers a finish to any edge. It can be used as a vertical edge trim on wall tiles or horizontally with floor tiles, or as a feature strip in wall or floor applications. The extruded aluminium profile gives a square appearance when installed with a slight bevelled edge for a smooth finish, and is available with corner pieces (ECG) to obviate sharp edges when mitring is required.