HRV accessory designed to deliver cooling and filtered air for user comfort in warmer weather conditions.

HRV accessory designed to deliver cooling and filtered air for user comfort in warmer weather conditions.

HRV accessory, designed to deliver cooling and filtered air for user comfort in warmer weather conditions.

It seamlessly integrates into heat recovery ventilation systems and has intuitive controls.

Equipped with an integrated cooling module, the HRV Q Plus/ MVHR system enhances its performance by pre-cooling incoming fresh air during warmer months. By merging improved air quality and energy efficiency, MVHR systems with cooling modules greatly aid in creating sustainable and comfortable indoor environments, while also aligning with Approved Document O (ADO) guidelines by recycling energy within a home.

Features and benefits:

• Up to 3.3 kW total cooling (subject to volume flow and relative humidity).
• Available for wall mounting or floor mounting.
• When using the wall bracket the supporting wall must be suitable for the combined weight of the cooler, MVHR, bracket assembly (wall: 100 kg; floor: 106 kg).
• Minimal maintenance of fully sealed refrigerant heat pump with coil and fin heat exchangers, similar to a fridge or freezer.
• Proven and reliable.
• Refrigerant is R407c (GWP 1774).
• Heat cell will provide cooling assistance to pre-chill incoming fresh air when in operation exactly as it does normally with heat.
• Installation below the ceiling in the heated space but compact enough to permit the location of a washing machine below.
• Port sizes are 160 mm.

HRV accessory, designed to deliver cooling and filtered air for user comfort in warmer weather conditions.

It seamlessly integrates into heat recovery ventilation systems and has intuitive controls.

Equipped with an integrated cooling module, the HRV Q Plus/ MVHR system enhances its performance by pre-cooling incoming fresh air during warmer months. By merging improved air quality and energy efficiency, MVHR systems with cooling modules greatly aid in creating sustainable and comfortable indoor environments, while also aligning with Approved Document O (ADO) guidelines by recycling energy within a home.

Features and benefits:

• Up to 3.3 kW total cooling (subject to volume flow and relative humidity).
• Available for wall mounting or floor mounting.
• When using the wall bracket the supporting wall must be suitable for the combined weight of the cooler, MVHR, bracket assembly (wall: 100 kg; floor: 106 kg).
• Minimal maintenance of fully sealed refrigerant heat pump with coil and fin heat exchangers, similar to a fridge or freezer.
• Proven and reliable.
• Refrigerant is R407c (GWP 1774).
• Heat cell will provide cooling assistance to pre-chill incoming fresh air when in operation exactly as it does normally with heat.
• Installation below the ceiling in the heated space but compact enough to permit the location of a washing machine below.
• Port sizes are 160 mm.