Suitable for residential and commercial settings, including:

• Shopping centres.
• Restaurants.
• Airports.
• Hotels.
• Banks.

Centre-folding hardware for all-glass concertina walls without a bottom guide channel, for panel weights up to 80 kg.

Features and benefits:

• Elegant design.
• Panel width: 500–900 mm.
• Maximum panel height: 2600 mm.
• Suitable for door panel thickness of 10–12.7 mm.
• Left and right-handed configurations, as well as inwards or outwards-opening installations can all be achieved using the same components.
• Smooth, quiet operation.
• Minimal stacking space required.
• Includes a secure locking mechanism.
• Attached to every other panel is a folding (pivot) door catch with an integrated, individually adjustable retainer, to hold the centre fold wall flush when closed without operating a locking mechanism.
• An access door equipped with our top pivot may also be added on the opposite side to the folding stack.
• Compatible for use with sliding doors: Fully tempered monolithic glass (of 8, 10, 12 and 12.7 mm thickness) and fully tempered laminated glass, and fixed doors: Fully tempered monolithic glass (of 8, 12 and 12.7 mm thickness) and fully tempered laminated glass (of 10.8–13 mm thickness).
• Has mid-point panel suspension, which means that the installation does not require a bottom guide channel up to six and a half panels.
• All mechanisms, suspension devices, guides and locks are fully integrated into the aesthetically pleasing suspension and glass retainer profiles.
• Vertical adjustment (±3 mm).

Components:

Quantities of each component will vary dependent on variant specified, consult manufacturer for details.

• Four-wheeled trolley M10, with plastic wheels.
• Four-wheeled trolley M10, with plastic wheels and spacer.
• Top pivot bearing.
• Vertically adjustable driver for pivot door.
• End stop.
• Folding/ pivot door catch (adjustable).
• Hawa bar bolt lock, square/ hexagon socket 7/ 8 mm, complete with pivot (standard).
• Vertical adjustment key SW 19.
• Suspension assembly locking wrench SW 10/11.
• Fork spanner SW 22/12, pivot door vertical adjustment.