Summary
Fully supported metal standing seam roof system.
-
-
Application
Fully supported metal standing seam roof covering that's suitable for a wide range of new build and refurbishment applications:
- Residential
- Commercial
- Education
- Healthcare
- Leisure
Can be used for warm and cold roof constructions.
Suitable for roof pitches above 5° and above.
Can be integrated with renewable technologies including Photovoltaic solutions
Compatible with rainwater harvesting systems
-
-
Description
EasySeam Standing Seam Roof System offers a contemporary, robust, high-quality solution. It uses a metal standing seam profile to offer a durable solution that’s quick and easy to install.
Offered as a complete kit of parts, EasySeam Roof System includes breather membrane, ridge, eaves and verge flashings, fixings and sealant, ensuring you get the very best aesthetics and quality for your whole roof.
Full list of downloads including DWG details is available here
Features and benefits:
- Engineered system that is manufactured to order, reducing on site waste.
- Four different EasySeam profiles, each with a 25 mm high seam.
- Available in a choice of pre-finished steel options and colours depending on application; Tata Steel Colorcoat Colorcoat Prisma and HPS200 Ultra and SSAB Greencoat Pural BT.
- Suitable for roof pitches 5° and above.
- Available in 300 and 500 mm widths.
- Up to 8 m lengths available.
- Snap and lock system enables quick and easy installation.
- Notches and tabs at both ends of the profile allow the seam to be sealed from the elements.
- Profiles can be laid firmly onto 18 mm Oriented Strand Board (OSB)3 on top of a breathable membrane, with no requirement for additional brackets.
- Fixings are hidden by the adjacent profile, delivering a stylish and sleek appearance that is typical of a standing seam roof.
- Seven times lighter than roof tiles, improving site handleability and reducing final roof weight.
- Suitable for integration with renewable technologies including Photovoltaics.
- Compatible with rainwater harvesting systems.
- Can achieve A1 fire rating when supported by a galvanized steel deck and a suitable non combustible A1 rated insulation and build-up.
- Tested by the Building Research Establishment (BRE) to achieve Broof(T4) fire test to BS EN 13501-5.
- CE marked to EN 14783.
- A sound reduction level of RW - 45 dB can be achieved by the system.
- Matching soffits and facias available.
- Fit and forget system.
Integration with renewables:
Vertix EasySeam Roof System has been designed to accommodate a number of different Photovoltaic solutions.
Compatible with rainwater harvesting systems:
Vertix EasySeam Roof System can be used for rainwater collection for non-potable uses such as irrigation, toilet flushing and cleaning. This can help to promote sustainable water management practices and contribute towards conserving of fresh water sources.
System performance:
- Design life/ durability: in excess of 40 years.
- Fire performance: BroofT4.
- Acoustic performance: buildups achieving sound reduction of RW -45 Db.
- Thermal performance: buildups achieving performance down to 0.11 U value.
- Avoidance of condensation: cold and warm roof buildups with condensation risk assessment available.
- Water penetration: steel is non permeable.
- Guarantee available: Confidex Home (25 years) and Confidex (up to 40 years).
- Verification of compliance with design, performance and quality requirements: KIWA pending, ISO 9001 pending.
-
-
Product certifications
-
-
Digital objects
-
-
Color
Black, Grey, Other, Copper, Blue, Gold, Green, Cream, Brown, Silver
-
-
Finish
Pre-treated, Coated
-
-
Material
Steel
-
-
Shape
Other
-
-
Length
Bespoke
-
-
Width
300 mm, 500 mm
-
-
Height
25 mm
-
-
Warranty description
25 year
-
-
Specification
Classification data
Sarking and roof boarding
OSB3 18 mm.
-
-
Air and vapour control layer
Permavent Envirotect AVCL 150 Reflect.
-
-
Carrier
25 mm wood batten at 600 mm maximum centres Underside rafters 18 mm OSB3 board.
-
-
Substrate
OSB3 18 mm.
-
-
Sheet underlay
Protect Zytec permeable underlay.
-
-
Fasteners
Staples.
-
-
Timber cores for batten roll joints
-
-
-
Fasteners to substrate
Ringpin nail Z-FRP40W3 38 x 3.8 mm.
-
-
Carbon steel
0.67 mm gauge, Z275 galvanized, S280 carbon steel sheet to BS EN 14783.
-
-
Longitudinal joints
-
-
-
Form
Standing seam joints.
-
-
Fixed standing seam joints
Standing seam fixed clips
-
-
Fasteners to substrate
Manufacturer's Colour matched 4.8 mm multi grip aluminium rivets., Stainless steel shank Low profile colour matched bi metallic self drilling fasteners JT3 FR 2H 6.3 standard.
-
-
Cross joints
40 mm corner flashing, 150 mm butt strap, same material as standing seam profile.
-
-
Form
Snap and lock system.
-
-
Eaves detail
-
-
-
Form
Eave drip flashing., Ventilated eaves detail.
-
-
Fixings
Manufacturer's Colour matched 4.8 mm multi grip aluminium rivets., Stainless steel shank Low profile colour matched bi metallic self drilling fasteners JT3 FR 2H 6.3 standard.
-
-
Verge sheets
-
-
-
Sheets
Verge flashing.
-
-
Fixing
Manufacturer's Colour matched 4.8 mm multi grip aluminium rivets., Stainless steel shank Low profile colour matched bi metallic self drilling fasteners JT3 FR 2H 6.3 standard.
-
-
Ridge and hip details
-
-
-
Fixings
Manufacturer's Colour matched 4.8 mm multi grip aluminium rivets., Stainless steel shank Low profile colour matched bi metallic self drilling fasteners JT3 FR 2H 6.3 standard.
-
-
Abutments
-
-
-
Form
Mono ridge capping., Duo ridge capping., Top abutment flashing., Apron flashing Side abutment flashing., Hip flashing., Valley flashing., Mansard detail., Ventilated duo ridge flashing., Ventilated mono ridge flashing.
-
-
Fixing into joints and chases
-
-
-
Fasteners
Manufacturer's Colour matched 4.8 mm multi grip aluminium rivets., Stainless steel shank Low profile colour matched bi metallic self drilling fasteners JT3 FR 2H 6.3 standard.
-
-
Pointing to joints and chases
Sika 11FC black, grey or white.
-
-
Additional properties
Width
300 mm., 500 mm.
-
-
Primary fasteners
Wood screws with 30 mm penetration into rafter.
-
-
Support structures
400 mm spaced rafter., 600 mm space rafter.
-
-
End and side laps
2 mm gap between boards for thermal expansion.
-
-
Acoustic insulation
-
-
-
Cavity fire barriers
Separating walls need to be detailed correctly to the underside of the supporting board for roof.
-
-
External sheets
Manufacturer's Colour matched 4.8 mm multi grip aluminium rivets., Stainless steel shank Low profile colour matched bi metallic self drilling fasteners JT3 FR 2H 6.3 standard.
-
-
End and side laps
Open and close welts on the flashings depending on face or secret fix.
-
-
Fascia
150 x 40 mm., 250 x 40 mm., 350 x 40 mm., 450 x 40 mm., 550 x 40 mm.
-
-
Fasteners
Manufacturer's Colour matched 4.8 mm multi grip aluminium rivets., Stainless steel shank Low profile colour matched bi metallic self drilling fasteners JT3 FR 2H 6.3 standard., Ring shank nail 38 x 3.8 mm 993840-SC2.
-
-
Soffit
Flat., Square edge., Plank.
-
-
Fasteners
Manufacturer's Colour matched 4.8 mm multi grip aluminium rivets., Stainless steel shank Low profile colour matched bi metallic self drilling fasteners JT3 FR 2H 6.3 standard., Ring shank nail 38 x 3.8 mm 993840-SC2.
-
-
Jointing
Soffit gripper, soffit joining gripper, 150 mm butt strap.
-
-
Gutters
Colour matched 140 mm (0.6 mm) pre-coated galvanised steel rectangular gutter., Colour matched 100 mm (0.6 mm) pre-coated galvanised steel round gutter., 1.2 mm DX51 steel with a 1.2 mm unique textured anti slip emboss laminate with internal colour RAL 7012.
-
-
Support
External gutter - External bracket to manufacturers specification. Fixed to fascia board/18 mm OSB3., Hidden/ internal gutter - OSB3 18 mm formed to suit.
-
-
Fasteners
Wood screw for external gutter.
-
-
Jointing
External gutter - gutter joint with internal EPDM seal., Hidden/ internal gutter - 150 mm butt straps and hot air weldable jointing tape.
-
-
Finish
Tata Steel Colorcoat Prisma - 65 micron polyurethane paint, 10 micron polyester backing coat., SSAB Greencoat Pural BT 50 micron polyurethane paint, 12 micron polyester backing coat., Tata Steel Colorcoat HPS200 Ultra - 200 micron plastisol.
-
-
Length
-
-
-
Sustainability data
Contains Red List materials
No
-
-
Country of material origin
Europe
-
-
Country of product manufacture
United Kingdom
-
-
Manufacturing plant location
Monmouth NP25, UK
-
-
Material
Steel
-
-
A1–A3 ('Production stage')
Embodied carbon as defined in BS EN 15804
Lower emissions
Normalized unit
-
-
-
Declared unit
18 kg CO₂ eq/m²
Certified
-
-
Recyclability
100% recyclable.
-
-
Recycled content
17 %
-
-
Expected Life
40 year
-
-