Suitable for use as a roof covering, facade rainscreen cladding and also a dormer roof and fascia finish.

Installation:

A list of approved installers is available on request by postcode.

Email:

alan@metalsolutions.uk.com

Suitable for use as a roof covering, facade rainscreen cladding and also a dormer roof and fascia finish.

Installation:

A list of approved installers is available on request by postcode.

Email:

alan@metalsolutions.uk.com

The Snaplock ® standing seam system is extensively used in Europe and the United States of America, where the system has proved itself in the extremely varied climate. This system with traditional detailing gives an aesthetically pleasing finish whilst avoiding the industrial finishes found in other standing seam systems. Suitable for use as a roof covering, facade rainscreen cladding and also a dormer roof and fascia finish.

Features and benefits:

• Manufactured from lightweight corrosion resistant phosphorus deoxidized copper (Cu-DHP, 99.9% pure) which complies with EN 1172.
• Material - A1 fire rated, anti microbial.
• Exceptional, indefinite lifespan demonstrated over hundreds of years.
• Seams are available in 25 or 38 mm formats.
• The Snaplock® seam system can be laid on a ventilated timber substrate, composite panel or direct on insulation, using special warm roof fixing clips.
• Snaplock® is much simpler and requires less skill/ hand tools than the traditional standing seam. The profile contains an undercloak and an overcloak – the undercloak side is fixed with a stainless steel fixing clip with the overcloak side then snapped into place.
• The system can be provided as a complete roof kit including all flashing, matching rainwater products and ancillaries.

Substructure:

Snaplock® can be mounted on all roof build-ups, the only pre-requisite being that it is fully supported.

Suitable substructure materials:

• Ventilated 18 mm-thick weather and boil proof (WPB) plywood.
• Ventilated oriented strand board OSB3.
• Composite panel.
• Rigid insulation.
• Profiled metal roofing.

Underlay:

ISO-Mat Pro® underlay is recommended for cold roof applications.

ISO-Mat Metal® underlay is recommended for warm roof applications.

Available from:

roofing-tools.com

Clips:

• 25 mm seam: SM-EH-Snap-25 (SM-EDH-Snap-25 for fixing to rigid insulation).
• 38 mm seam: SM-EH-Snap-38 (SM-EDH-Snap-38 for fixing to rigid insulation).
• Flashing clips: SM-ELH-27.

Available from:

roofing-tools.com

The Snaplock ® standing seam system is extensively used in Europe and the United States of America, where the system has proved itself in the extremely varied climate. This system with traditional detailing gives an aesthetically pleasing finish whilst avoiding the industrial finishes found in other standing seam systems. Suitable for use as a roof covering, facade rainscreen cladding and also a dormer roof and fascia finish.

Features and benefits:

• Manufactured from lightweight corrosion resistant phosphorus deoxidized copper (Cu-DHP, 99.9% pure) which complies with EN 1172.
• Material - A1 fire rated, anti microbial.
• Exceptional, indefinite lifespan demonstrated over hundreds of years.
• Seams are available in 25 or 38 mm formats.
• The Snaplock® seam system can be laid on a ventilated timber substrate, composite panel or direct on insulation, using special warm roof fixing clips.
• Snaplock® is much simpler and requires less skill/ hand tools than the traditional standing seam. The profile contains an undercloak and an overcloak – the undercloak side is fixed with a stainless steel fixing clip with the overcloak side then snapped into place.
• The system can be provided as a complete roof kit including all flashing, matching rainwater products and ancillaries.

Substructure:

Snaplock® can be mounted on all roof build-ups, the only pre-requisite being that it is fully supported.

Suitable substructure materials:

• Ventilated 18 mm-thick weather and boil proof (WPB) plywood.
• Ventilated oriented strand board OSB3.
• Composite panel.
• Rigid insulation.
• Profiled metal roofing.

Underlay:

ISO-Mat Pro® underlay is recommended for cold roof applications.

ISO-Mat Metal® underlay is recommended for warm roof applications.

Available from:

roofing-tools.com

Clips:

• 25 mm seam: SM-EH-Snap-25 (SM-EDH-Snap-25 for fixing to rigid insulation).
• 38 mm seam: SM-EH-Snap-38 (SM-EDH-Snap-38 for fixing to rigid insulation).
• Flashing clips: SM-ELH-27.

Available from:

roofing-tools.com