Suitable for supporting outer leaf of masonry cladding for concrete and steel framed structures.

Ultima is designed so that the interchangeable brackets allow for significant deviations in the position of the structural face. The use of shims can also adjust for slight deviations.

Wincro Ultima has been developed to fix back to range of structures using approved Wincro fixings as below.To

Concrete using:

• Wincro WBT T-head Bolt to continuous cast-in channel, or

• Wincro WBEB Expansion Bolts, or

• Wincro WBRC Resin Anchor System

To Steelwork using:

• Wincro WBXS Isolated Hex-Head Set Screw & Isolation to

steel plates/gussets within the steelwork beam

To Hollow sections using:

• Wincro WBBB RHS Bolt Fixing & Isolation (to RHS / SHS

sections)

Suitable for supporting outer leaf of masonry cladding for concrete and steel framed structures.

Ultima is designed so that the interchangeable brackets allow for significant deviations in the position of the structural face. The use of shims can also adjust for slight deviations.

Wincro Ultima has been developed to fix back to range of structures using approved Wincro fixings as below.To

Concrete using:

• Wincro WBT T-head Bolt to continuous cast-in channel, or

• Wincro WBEB Expansion Bolts, or

• Wincro WBRC Resin Anchor System

To Steelwork using:

• Wincro WBXS Isolated Hex-Head Set Screw & Isolation to

steel plates/gussets within the steelwork beam

To Hollow sections using:

• Wincro WBBB RHS Bolt Fixing & Isolation (to RHS / SHS

sections)

A standard support system comprising of a front loading support angle with pre-marked fixing zones, and a range of brackets and fixings to suit masonry loads up to 14 kN/m and cavities from 50 to 150 mm wide.

Type:

• WSU Wincro Ultima Support System is suitable for masonry loads up to 14 kN/m.
• WSU2 Wincro Ultima Support System is suitable for masonry loads up to 12 kN/m.

Features and benefits:

• Brackets and angles are interchangeable.
• Provides greater on-site adjustment compared with ‘traditional’ welded systems.
• Can be easily moved around site and the system requires no setting out or detailed layouts.
• Brackets can be simply changed on site to suit cavity variances between the structure and brickwork.
• CE marked to BS EN 1090-1.
• Cost effective, convenient and easy installation.

A standard support system comprising of a front loading support angle with pre-marked fixing zones, and a range of brackets and fixings to suit masonry loads up to 14 kN/m and cavities from 50 to 150 mm wide.

Type:

• WSU Wincro Ultima Support System is suitable for masonry loads up to 14 kN/m.
• WSU2 Wincro Ultima Support System is suitable for masonry loads up to 12 kN/m.

Features and benefits:

• Brackets and angles are interchangeable.
• Provides greater on-site adjustment compared with ‘traditional’ welded systems.
• Can be easily moved around site and the system requires no setting out or detailed layouts.
• Brackets can be simply changed on site to suit cavity variances between the structure and brickwork.
• CE marked to BS EN 1090-1.
• Cost effective, convenient and easy installation.