Suitable for areas where occasional access is required.

Suitable for areas where occasional access is required.

The Removable Parking Post is suitable for areas where occasional access is required. The post is typically locked in place over night and removed during the day.

Features and benefits:

• Additional ground sockets are available for storing the post in a convenient location when not in use.
• The RPP is available in galvanized and galvanized and coated finish.
• The FB version lid has been adapted from a standard RPP to allow the use of FB padlocks.
• The post is supplied without a padlock thus allowing the user to specify their own preferred lock (The RSP variant includes a High Security Lock).
• 900 mm above ground.
• Socket Dimensions 267 x 152 x 160 mm (h x w x l).
• 60mm, 76mm and 90mm outside diameter galvanized steel tube body.
• Plastic cap.

Installation:

• It is recommended that posts are placed no further than 1200 mm apart to ensure no vehicle may pass between.
• The ground socket must be concreted into a hole of approximately 300 mm³.
• The flap should be flush with the surrounding ground level when closed.
• Suitable provision for should be allowed for drainage from the bottom of the excavated hole.

The Removable Parking Post is suitable for areas where occasional access is required. The post is typically locked in place over night and removed during the day.

Features and benefits:

• Additional ground sockets are available for storing the post in a convenient location when not in use.
• The RPP is available in galvanized and galvanized and coated finish.
• The FB version lid has been adapted from a standard RPP to allow the use of FB padlocks.
• The post is supplied without a padlock thus allowing the user to specify their own preferred lock (The RSP variant includes a High Security Lock).
• 900 mm above ground.
• Socket Dimensions 267 x 152 x 160 mm (h x w x l).
• 60mm, 76mm and 90mm outside diameter galvanized steel tube body.
• Plastic cap.

Installation:

• It is recommended that posts are placed no further than 1200 mm apart to ensure no vehicle may pass between.
• The ground socket must be concreted into a hole of approximately 300 mm³.
• The flap should be flush with the surrounding ground level when closed.
• Suitable provision for should be allowed for drainage from the bottom of the excavated hole.