Summary
Hybrid XPS & Vacuum Insulated Panel (VIP) – Inverted Roof Insulation System.
-
-
Application
- Suitable for use in roofs, roof terraces, enclosed balconies over heated space and insulated walkways in an inverted roof construction.
- When used in the inverted roof constructions listed in the Fire Performance section below roof constructions incorporating ProTherm Quantum® PLUS+ achieve Broof(t4) Classification to BS EN 13501-5 as required by Approved Document B 2019 edition, Section B4, Limitations on roof coverings.
- Not suitable for use in inverted roof applications on specified attachments such as projecting open balconies, projecting enclosed balconies, recessed open balconies or recessed enclosed balconies. If you are uncertain if your roof classifies as a restricted zone for combustible materials please contact us.
-
-
Description
ProTherm Quantum® PLUS+ Inverted Roof Insulation System is a rigid Vacuum Insulation Panel (VIP) consisting of a compressed fumed silica sand microporous core which is evacuated of air and moisture before being encased and sealed in a special thin, gas-tight, hybrid aluminium foil envelope, encapsulated in a solvent free polyurethane waterproof coating. The coating is a factory applied solvent free two component elastomeric polyurethane waterproofing membrane.
The Hybrid System combines the ultra high-performance Quantum® PLUS+ panel with a layer ProTherm XPS Insulation to provide the most cost-effective thermal solution. Minimizing the quantity of VIPs within a roofing solution offers a huge range of flexibility in depths and performance, for use beneath terraces, green roofs, blue roofs and podia. Quantum® PLUS+ Panels always make up the first layer in a hybrid system, with the ProTherm XPS installed above at minimum 150mm overlaps, which also provides additional mechanical protection for high-traffic areas.
Features and benefits:
- The resulting panel gives outstanding thermal conductivity, with the thinnest possible insulation solution.
- Declared (aged) thermal conductivity of 0.007 W/m.K.
- An insulating performance that is up to five times better than other commonly available insulation materials.
- Meets the requirements of Building Regulations Part L, Part M and NHBC Chapter 7.1.
- BS EN 13501-1:2016 – ProTherm Quantum® PLUS+ VIP Inverted Roof Insulation achieves Euro Class E performance.
-
-
Product certifications
-
-
Color
Grey
-
-
Material
Polyurethane, Silica, Sand
-
-
Shape
Square, Rectangle
-
-
Length
302 mm, 402 mm, 602 mm, 1002 mm, 1200 mm, 1202 mm
-
-
Width
302 mm, 402 mm, 602 mm
-
-
Height
Bespoke
-
-
Specification
Classification data
General requirements
Insulation products generally.
-
-
Edges
Butt.
-
-
Panel facings
Anthracite, polyurethane waterproofing membrane.
-
-
Dimensions
-
-
-
Size (length x width)
302 x 302 mm.
-
-
Thickness
20 mm., 25 mm., 30 mm., 35 mm., 40 mm., 45 mm., 50 mm., 55 mm., 60 mm., 65 mm., 70 mm., 75 mm., 80 mm., 85 mm., 90 mm., 95 mm., 100 mm.
-
-
Density (minimum)
To BS EN 1602: 1997, 180–210 kg/m³.
-
-
Thermal conductivity (maximum)
To EN 12667: 2001, 0.007 W/mK.
-
-
Compressive strength (minimum)
To BS EN 826: 1996, 160 kPa.
-
-
Fire performance
To BS EN 13501-1, Class E.
-
-
Execution
Vacuum-insulated panel installation.
-
-
Additional properties
SurfaceTemperature
-40 to +80°C.
-
-
Weight
0.35 kg., 0.44 kg., 0.52 kg., 0.7 kg., 0.87 kg.
-
-
Area
0.091 m².
-
-
Sustainability data
Contains Red List materials
No
-
-
Country of material origin
Europe
-
-
Country of product manufacture
Europe
-
-
Material
Polyurethane, Silica, Sand
-
-
Recyclability
0%
-
-
Recycled content
0 %
-
-