Suitable for safely fixing to concrete, steelwork or masonry.

Frame cramps can be fixed to concrete, steelwork or masonry and have two outer 6 mm diameter holes and one central 7 mm diameter hole or an 8 x 30 mm fixing slot. Wincro WBEB M6 Expansion bolts are recommended for fixing to concrete, WBXS set screws or WBSD self-drill self-tapping screws for steelwork, and suitable plugs and screws for fixing to masonry. Large washers must be used with all WTS2E, WTS3E and similar ties with a slot. Frame cramps should have a minimum embedment of 50 mm in the outer leaf. Taking site tolerances into account, Wincro suggests tie lengths that achieve a greater embedment of 62.5–75 mm.

Frame cramps include:

• Wincro WTS3E – Safe ended frame cramp with 8 x 30 mm fixing slot.
• Wincro WTS2E – Safe ended frame cramp with drip and 8 x 30 mm fixing slot.
• Wincro WTS3U – Safe ended frame cramp with two outer 6 mm diameter holes and one central 7 mm diameter hole.
• Wincro WTS2U – Safe ended frame cramp with drip and two outer 6mm diameter holes and one central 7 mm diameter hole.
• Wincro WTP3U – Plain ended frame cramp (movement tie) with two outer 6 mm diameter holes and one central 7 mm diameter hole for use with WDS de-bonding sleeve.
• Wincro WTP3E – Plain ended frame cramp (movement ties) with 8 x 30 mm fixing slot for use with WDS de-bonding sleeve.

Features and benefits:

• Available with holed or slotted upstands, safety or plain ends, drip indents, twists or wire ends.
• Frame cramps can be produced to suit any construction detail.
• Manufactured from corrosion resistant stainless steel.
• For cavities up to 175 mm.
• Available from 75 to 250 mm projections manufactured in 25 mm increments with other sizes available to special order.
• CE approved.