Designed to provide a level, anti-slip means of traversing roofs – including corrugated and standing seam roof constructions – for access and maintenance.

• Flat – suitable for flat roof areas and standing seam constructions.
• Valley – suitable for ‘V’ shaped valleys/ gutters.
• Half Valley – suitable for gutter areas up against walls, etc.

Designed to provide a level, anti-slip means of traversing roofs – including corrugated and standing seam roof constructions – for access and maintenance.

• Flat – suitable for flat roof areas and standing seam constructions.
• Valley – suitable for ‘V’ shaped valleys/ gutters.
• Half Valley – suitable for gutter areas up against walls, etc.

Designed to provide a level, anti-slip means of traversing roofs – including corrugated and standing seam roof constructions – for access and maintenance.

• Flat – suitable for flat roof areas and standing seam constructions.
• Valley – suitable for ‘V’ shaped valleys/ gutters.
• Half Valley – suitable for gutter areas up against walls, etc.

A range of walkways designed to provide a level, anti-slip means of traversing roofs – including corrugated and standing seam roof constructions – for access and maintenance. Health and Safety Executive recommends a minimum width of 430 mm, or 600 mm if materials are to be carried along a walkway.

Features and benefits:

• A safety tread incorporated in the top plank provides safe footing, even in wet conditions.
• WalkSafe® modular panels are manufactured, to order, from extruded PVC-U.
• The panels are clipped together on-site using integral fasteners.
• Fixing through the roof membrane is not required under normal conditions.
• When used on flat roofs, the roof deck must comply with BS 629.
• When used over roof waterproofing membranes, the waterproofing layer should have a minimum static indentation rating of L3, when tested to MOAT No 27:1983, to ensure sufficient resistance to damage.

A range of walkways designed to provide a level, anti-slip means of traversing roofs – including corrugated and standing seam roof constructions – for access and maintenance. Health and Safety Executive recommends a minimum width of 430 mm, or 600 mm if materials are to be carried along a walkway.

Features and benefits:

• A safety tread incorporated in the top plank provides safe footing, even in wet conditions.
• WalkSafe® modular panels are manufactured, to order, from extruded PVC-U.
• The panels are clipped together on-site using integral fasteners.
• Fixing through the roof membrane is not required under normal conditions.
• When used on flat roofs, the roof deck must comply with BS 629.
• When used over roof waterproofing membranes, the waterproofing layer should have a minimum static indentation rating of L3, when tested to MOAT No 27:1983, to ensure sufficient resistance to damage.

A range of walkways designed to provide a level, anti-slip means of traversing roofs – including corrugated and standing seam roof constructions – for access and maintenance. Health and Safety Executive recommends a minimum width of 430 mm, or 600 mm if materials are to be carried along a walkway.

Features and benefits:

• A safety tread incorporated in the top plank provides safe footing, even in wet conditions.
• WalkSafe® modular panels are manufactured, to order, from extruded PVC-U.
• The panels are clipped together on-site using integral fasteners.
• Fixing through the roof membrane is not required under normal conditions.
• When used on flat roofs, the roof deck must comply with BS 629.
• When used over roof waterproofing membranes, the waterproofing layer should have a minimum static indentation rating of L3, when tested to MOAT No 27:1983, to ensure sufficient resistance to damage.