Summary
Car park fans designed to reduce the concentrations of polluted air and to assist with the extraction of smoke trapped in car parks, in the event of a fire.
Car park fans designed to reduce the concentrations of polluted air and to assist with the extraction of smoke trapped in car parks, in the event of a fire.
Application
Car park fans designed to reduce the concentrations of polluted air and to assist with the extraction of smoke trapped in car parks, in the event of a fire.
Car park fans designed to reduce the concentrations of polluted air and to assist with the extraction of smoke trapped in car parks, in the event of a fire.
Description
Car park fans designed to reduce the concentrations of polluted air and to assist with the extraction of smoke trapped in car parks, in the event of a fire.
Fans are manufactured to the ISO 9001 quality standard. It incorporates a backward curve centrifugal impeller with a high temperature external rotor motor rated at 300°C for one hour.
Features and benefits:
- Slimline design, only 308 or 252 mm deep. This reduces the required headroom in car parks and thus lowers excavation costs.
- Certified performance - exhaustively tested and certified to EN 12101-3 in accredited third party test laboratories and is CE marked.
- Durable construction: manufactured from hot-dipped galvanized steel casing with the option of a polyester powder coating to any RAL colour.
- All fans are manufactured to the ISO 9001 quality standard.
- Low maintenance, no ductwork to clean.
- High thrust: each fan can ventilate a significantly higher floor area, meaning fewer units are required than with conventional impulse units. Requires lower cabling and control requirements as well as lower installation and maintenance costs.
- Speed options: Suitable for either two-speed or variable-speed operation, depending on the application. Where the unit is inverter (variably) controlled, the amount of power consumed is reduced.
Car park fans designed to reduce the concentrations of polluted air and to assist with the extraction of smoke trapped in car parks, in the event of a fire.
Fans are manufactured to the ISO 9001 quality standard. It incorporates a backward curve centrifugal impeller with a high temperature external rotor motor rated at 300°C for one hour.
Features and benefits:
- Slimline design, only 308 or 252 mm deep. This reduces the required headroom in car parks and thus lowers excavation costs.
- Certified performance - exhaustively tested and certified to EN 12101-3 in accredited third party test laboratories and is CE marked.
- Durable construction: manufactured from hot-dipped galvanized steel casing with the option of a polyester powder coating to any RAL colour.
- All fans are manufactured to the ISO 9001 quality standard.
- Low maintenance, no ductwork to clean.
- High thrust: each fan can ventilate a significantly higher floor area, meaning fewer units are required than with conventional impulse units. Requires lower cabling and control requirements as well as lower installation and maintenance costs.
- Speed options: Suitable for either two-speed or variable-speed operation, depending on the application. Where the unit is inverter (variably) controlled, the amount of power consumed is reduced.
Color
Silver, Other
Silver, Other
Finish
Galvanized, Powder-coated
Galvanized, Powder-coated
Material
Steel
Steel
Shape
Rectangle
Rectangle
Length
1206 mm, 1457 mm
1206 mm, 1457 mm
Width
830 mm, 1000 mm
830 mm, 1000 mm
Height
252 mm, 308 mm
252 mm, 308 mm
Specification
Classification data
Standard
To EN 12101-3.
To EN 12101-3.
Duty
-
-
Air volume
1.63/ 0.81 m³/s.
2.45/ 1.21 m³/s.
Fan speed
Single speed DOL motor., Two speed dahlander motor.
Single speed DOL motor., Two speed dahlander motor.
Sound power level spectrum
70.1/ 53.5 dB(A).
71.3/ 55.5 dB(A).
Additional properties
Colour
Pre-galvanized sheet., Polyester powder coating, RAL.
Pre-galvanized sheet., Polyester powder coating, RAL.
Fire performance
Class F300 to EN 12101-3.
Class F300 to EN 12101-3.