Suitable for flat roof for easy and regular access to rooftop deck or roof terrace.

Suitable for flat roof for easy and regular access to rooftop deck or roof terrace.

The Freestanding Box Rooflight (Left Exit) consists of one single sliding door retracting over fixed glazing, designed for terrace access.

The handrail can continue right up to the point of exit.

The box rooflight consists of two sections, one fixed section and one sliding section. The sliding section slides over the fixed section to create a 50% clear opening thus allowing the user to walk through and out of the rooflight.

All the glass used is flush to allow water runoff and easy cleaning, whilst maintaining maximum security. The thermally broken detail on the fixed frame and insulated flashings on the sliding frame almost eliminates direct contact between the warm internal frame and the exterior cold air, reducing heat loss and condensation forming.

Features & Benefits:

• Low-noise in operation.
• Built in electronic solid-state controls with battery back-up, manual override, speed control and creep-speed sealing at end of travel as standard.
• The rooflight is opened electrically and includes a ‘one touch’ facility, where the switch is pressed and then released leaving the rooflight to open automatically.
• The unit can be stopped by pressing close once or can be only part opened by keeping the switch pressed until the desired point is reached.
• Includes drainage on rails to reduce build up of surface water on framework.

Optional Extras:

• Easy Clean Coating
• Kerb Top Trim
• Remote Control
• Rain Sensor
• BMS Connectivity
• Thermostat
• Keypad or Key Switch
• Battery Backup

Accreditations & Certifications:

• Glass Inspected To The Hadamar Standard.
• BSI ISO 9001 and ISO 14001.
• The Rooflight Association Member
• Weather tested by CWCT
• Qualicoat Approved Applicator

The Freestanding Box Rooflight (Left Exit) consists of one single sliding door retracting over fixed glazing, designed for terrace access.

The handrail can continue right up to the point of exit.

The box rooflight consists of two sections, one fixed section and one sliding section. The sliding section slides over the fixed section to create a 50% clear opening thus allowing the user to walk through and out of the rooflight.

All the glass used is flush to allow water runoff and easy cleaning, whilst maintaining maximum security. The thermally broken detail on the fixed frame and insulated flashings on the sliding frame almost eliminates direct contact between the warm internal frame and the exterior cold air, reducing heat loss and condensation forming.

Features & Benefits:

• Low-noise in operation.
• Built in electronic solid-state controls with battery back-up, manual override, speed control and creep-speed sealing at end of travel as standard.
• The rooflight is opened electrically and includes a ‘one touch’ facility, where the switch is pressed and then released leaving the rooflight to open automatically.
• The unit can be stopped by pressing close once or can be only part opened by keeping the switch pressed until the desired point is reached.
• Includes drainage on rails to reduce build up of surface water on framework.

Optional Extras:

• Easy Clean Coating
• Kerb Top Trim
• Remote Control
• Rain Sensor
• BMS Connectivity
• Thermostat
• Keypad or Key Switch
• Battery Backup

Accreditations & Certifications:

• Glass Inspected To The Hadamar Standard.
• BSI ISO 9001 and ISO 14001.
• The Rooflight Association Member
• Weather tested by CWCT
• Qualicoat Approved Applicator