Summary
Configurable high-efficiency heat recovery units.
Configurable high-efficiency heat recovery units.
Configurable high-efficiency heat recovery units.
Application
Commercial premises, offices, restaurants, public buildings, schools.
Commercial premises, offices, restaurants, public buildings, schools.
Commercial premises, offices, restaurants, public buildings, schools.
Description
Compact heat recovery unit with high-efficiency (up to 93%) counter-flow heat exchanger EUROVENT certified. The casing is made from plasticised galvanized steel in white. Panels are double skinned with thermo-acoustic flameproof insulation (A1/M0), made from 25 mm thick fiberglass in false ceiling versions (Models 04 to 33) and 47 mm in outdoor versions (Models 45 to 100).
Configurable and airtight supply and exhaust spigots, suitable for horizontal and vertical installation. Minimum outdoor temperature -10ºC. For lower temperatures it is necessary to use preheating batteries located in the outdoor air inlet.
Offers a robust construction, versatile assembly, easy maintenance and condensate tray (models 04-33 PRO REG).
Consult technical literature for performance values including airflow, connections, efficiency (>85%), fan speed and unit weight etc.
Versions available:
Horizontal and vertical configurations, without additional heat, electric battery included and water coil included units.
Single phase (CADB-HE PRO-REG) and three phase models (CADT-HE PRO-REG). Airflows from 450 to 10 000 m³/ hour.
- CADB/T-HE D PRO-REG
Heat recovery units without additional incorporated heater.
- CADB/T-HE DC PRO-REG
Heat recovery units with built-in hot water coil. The 3-Way valve is provided as an accessory (see accessories table for this series).
- CADB/T-HE DI PRO-REG
Heat recovery units with built-in electric heater battery.
Motors:
Models 04 to 33: Single phase EC motors with integrated electronic protection, 230V/I/50-60Hz IP44, Class B. Models 45 to 100: Three phase EC motors with integrated electronic protection, 400V/III/50-60Hz IP 54 class B.
Fans:
Plug-fan with backward curved impeller.
Filters:
- F7: Low pressure F7 filters (ePM1 70%) for supply air.
- M5: M5 filters (ePM10 50%) for extract air.
- Possibility of mounting a second filter inside the unit (accessory).
It is possible to complement the heat recovery unit with a specific range of water and direct expansion coils. Also available, the exclusive module IAQ with a high efficiency in the retention of pollutants associated with outdoor pollution (gases and particulate matter), providing adequate quality to the supplied air, even in polluted outdoor environments.
Control:
It includes an integral operation control, from factory assembled and wired to all the components included in the unit (fans, by-pass, filter pressure switches, temperature probes, etc.). Allows fans control in manual or automatic mode with the display of supply and extract real air volume in all the operation modes (fans pressure transmitters included): Variable airflow (VAV), constant pressure (COP) or constant airflow (CAV) (Available accessories for each mode). Also allows the management of heating coils (DI and DC versions). Integrated air and water temperature probes.
Description of the fan control modes which can be configured:
- VAV- variable air volume Fans speed can be regulated by a 0 - 10V signal from the remote touchscreen panel (included) or an external CO2 , temperature or humidity sensor (accessories).
- CAV - constant air volume Fans speed are automatically adjusted in order to maintain a constant airflow regardless of the filters fouling. Supply and extract fans are controlled independently allowing the configuration of different airflow values for each one. No accessories are required.
- COP - constant pressure Constant pressure measured by an external pressure sensor TDP-S (accessory). Appropriate control mode for multi-room installations with flow control dampers
Compact heat recovery unit with high-efficiency (up to 93%) counter-flow heat exchanger EUROVENT certified. The casing is made from plasticised galvanized steel in white. Panels are double skinned with thermo-acoustic flameproof insulation (A1/M0), made from 25 mm thick fiberglass in false ceiling versions (Models 04 to 33) and 47 mm in outdoor versions (Models 45 to 100).
Configurable and airtight supply and exhaust spigots, suitable for horizontal and vertical installation. Minimum outdoor temperature -10ºC. For lower temperatures it is necessary to use preheating batteries located in the outdoor air inlet.
Offers a robust construction, versatile assembly, easy maintenance and condensate tray (models 04-33 PRO REG).
Consult technical literature for performance values including airflow, connections, efficiency (>85%), fan speed and unit weight etc.
Versions available:
Horizontal and vertical configurations, without additional heat, electric battery included and water coil included units.
Single phase (CADB-HE PRO-REG) and three phase models (CADT-HE PRO-REG). Airflows from 450 to 10 000 m³/ hour.
- CADB/T-HE D PRO-REG
Heat recovery units without additional incorporated heater.
- CADB/T-HE DC PRO-REG
Heat recovery units with built-in hot water coil. The 3-Way valve is provided as an accessory (see accessories table for this series).
- CADB/T-HE DI PRO-REG
Heat recovery units with built-in electric heater battery.
Motors:
Models 04 to 33: Single phase EC motors with integrated electronic protection, 230V/I/50-60Hz IP44, Class B. Models 45 to 100: Three phase EC motors with integrated electronic protection, 400V/III/50-60Hz IP 54 class B.
Fans:
Plug-fan with backward curved impeller.
Filters:
- F7: Low pressure F7 filters (ePM1 70%) for supply air.
- M5: M5 filters (ePM10 50%) for extract air.
- Possibility of mounting a second filter inside the unit (accessory).
It is possible to complement the heat recovery unit with a specific range of water and direct expansion coils. Also available, the exclusive module IAQ with a high efficiency in the retention of pollutants associated with outdoor pollution (gases and particulate matter), providing adequate quality to the supplied air, even in polluted outdoor environments.
Control:
It includes an integral operation control, from factory assembled and wired to all the components included in the unit (fans, by-pass, filter pressure switches, temperature probes, etc.). Allows fans control in manual or automatic mode with the display of supply and extract real air volume in all the operation modes (fans pressure transmitters included): Variable airflow (VAV), constant pressure (COP) or constant airflow (CAV) (Available accessories for each mode). Also allows the management of heating coils (DI and DC versions). Integrated air and water temperature probes.
Description of the fan control modes which can be configured:
- VAV- variable air volume Fans speed can be regulated by a 0 - 10V signal from the remote touchscreen panel (included) or an external CO2 , temperature or humidity sensor (accessories).
- CAV - constant air volume Fans speed are automatically adjusted in order to maintain a constant airflow regardless of the filters fouling. Supply and extract fans are controlled independently allowing the configuration of different airflow values for each one. No accessories are required.
- COP - constant pressure Constant pressure measured by an external pressure sensor TDP-S (accessory). Appropriate control mode for multi-room installations with flow control dampers
Compact heat recovery unit with high-efficiency (up to 93%) counter-flow heat exchanger EUROVENT certified. The casing is made from plasticised galvanized steel in white. Panels are double skinned with thermo-acoustic flameproof insulation (A1/M0), made from 25 mm thick fiberglass in false ceiling versions (Models 04 to 33) and 47 mm in outdoor versions (Models 45 to 100).
Configurable and airtight supply and exhaust spigots, suitable for horizontal and vertical installation. Minimum outdoor temperature -10ºC. For lower temperatures it is necessary to use preheating batteries located in the outdoor air inlet.
Offers a robust construction, versatile assembly, easy maintenance and condensate tray (models 04-33 PRO REG).
Consult technical literature for performance values including airflow, connections, efficiency (>85%), fan speed and unit weight etc.
Versions available:
Horizontal and vertical configurations, without additional heat, electric battery included and water coil included units.
Single phase (CADB-HE PRO-REG) and three phase models (CADT-HE PRO-REG). Airflows from 450 to 10 000 m³/ hour.
- CADB/T-HE D PRO-REG
Heat recovery units without additional incorporated heater.
- CADB/T-HE DC PRO-REG
Heat recovery units with built-in hot water coil. The 3-Way valve is provided as an accessory (see accessories table for this series).
- CADB/T-HE DI PRO-REG
Heat recovery units with built-in electric heater battery.
Motors:
Models 04 to 33: Single phase EC motors with integrated electronic protection, 230V/I/50-60Hz IP44, Class B. Models 45 to 100: Three phase EC motors with integrated electronic protection, 400V/III/50-60Hz IP 54 class B.
Fans:
Plug-fan with backward curved impeller.
Filters:
- F7: Low pressure F7 filters (ePM1 70%) for supply air.
- M5: M5 filters (ePM10 50%) for extract air.
- Possibility of mounting a second filter inside the unit (accessory).
It is possible to complement the heat recovery unit with a specific range of water and direct expansion coils. Also available, the exclusive module IAQ with a high efficiency in the retention of pollutants associated with outdoor pollution (gases and particulate matter), providing adequate quality to the supplied air, even in polluted outdoor environments.
Control:
It includes an integral operation control, from factory assembled and wired to all the components included in the unit (fans, by-pass, filter pressure switches, temperature probes, etc.). Allows fans control in manual or automatic mode with the display of supply and extract real air volume in all the operation modes (fans pressure transmitters included): Variable airflow (VAV), constant pressure (COP) or constant airflow (CAV) (Available accessories for each mode). Also allows the management of heating coils (DI and DC versions). Integrated air and water temperature probes.
Description of the fan control modes which can be configured:
- VAV- variable air volume Fans speed can be regulated by a 0 - 10V signal from the remote touchscreen panel (included) or an external CO2 , temperature or humidity sensor (accessories).
- CAV - constant air volume Fans speed are automatically adjusted in order to maintain a constant airflow regardless of the filters fouling. Supply and extract fans are controlled independently allowing the configuration of different airflow values for each one. No accessories are required.
- COP - constant pressure Constant pressure measured by an external pressure sensor TDP-S (accessory). Appropriate control mode for multi-room installations with flow control dampers
Product certifications
Digital objects
Finish
Galvanized
Galvanized
Galvanized
Material
Steel
Steel
Steel
Warranty description
Two year
Two year
Two year
SKU Code
CADB/T-HE PRO-REG
CADB/T-HE PRO-REG
CADB/T-HE PRO-REG
Specification
Classification data
Casing construction
-
-
-
Fire protection
Category A.
Category A.
Category A.
Material
Galvanized sheet steel.
Galvanized sheet steel.
Galvanized sheet steel.
Finish
Galvanized.
Galvanized.
Galvanized.
Components
-
-
-
Filters
Low pressure F7 filters (ePM1 70%)., M5 filters (ePM10 50%)., G4 pre-filter., F9 filters.
Low pressure F7 filters (ePM1 70%)., M5 filters (ePM10 50%)., G4 pre-filter., F9 filters.
Low pressure F7 filters (ePM1 70%)., M5 filters (ePM10 50%)., G4 pre-filter., F9 filters.
Heaters
-
-
-
Pre-heaters
D: Standard range (Without additional incorporated heater).
DC: Range with built-in hot water coil.
DI: Range with built-in electric heater battery.
Supply fan
-
-
-
Fan type
Plug fans
Plug fans
Plug fans
Additional properties
Control
Control Plug & Play PRO-REG included.
Control Plug & Play PRO-REG included.
Control Plug & Play PRO-REG included.
Dimensions
1520 x 760 x 375 mm., 1750 x 910 x 425 mm., 1700 x 1050 x 425 mm., 1950 x 1240 x 450 mm., 2300 x 1640 x 550 mm., 2300 x 1640 x 650 mm., 2100 x 1500 x 1200 mm., 2250 x 1550 x 1580 mm., 1125 x 540 x 920 mm., 1275 x 610 x 1020 mm., 1325 x 770 x 1020 mm., 1475 x 770 x 1070 mm., 1750 x 970 x 1270 mm., 1750 x 1170 x 1270 mm., 2100 x 1120 x 1580 mm., 2250 x 1500 x 1630 mm., 2250 x 2050 x 1630 mm.
1520 x 760 x 375 mm., 1750 x 910 x 425 mm., 1700 x 1050 x 425 mm., 1950 x 1240 x 450 mm., 2300 x 1640 x 550 mm., 2300 x 1640 x 650 mm., 2100 x 1500 x 1200 mm., 2250 x 1550 x 1580 mm., 1125 x 540 x 920 mm., 1275 x 610 x 1020 mm., 1325 x 770 x 1020 mm., 1475 x 770 x 1070 mm., 1750 x 970 x 1270 mm., 1750 x 1170 x 1270 mm., 2100 x 1120 x 1580 mm., 2250 x 1500 x 1630 mm., 2250 x 2050 x 1630 mm.
1520 x 760 x 375 mm., 1750 x 910 x 425 mm., 1700 x 1050 x 425 mm., 1950 x 1240 x 450 mm., 2300 x 1640 x 550 mm., 2300 x 1640 x 650 mm., 2100 x 1500 x 1200 mm., 2250 x 1550 x 1580 mm., 1125 x 540 x 920 mm., 1275 x 610 x 1020 mm., 1325 x 770 x 1020 mm., 1475 x 770 x 1070 mm., 1750 x 970 x 1270 mm., 1750 x 1170 x 1270 mm., 2100 x 1120 x 1580 mm., 2250 x 1500 x 1630 mm., 2250 x 2050 x 1630 mm.
Power supply
CADB/T-HE: Three-phase power supply.
CADB/T-HE: Three-phase power supply.
CADB/T-HE: Three-phase power supply.
Size:
04., 08., 12., 16., 21., 27., 33., 45., 60., 100.
04., 08., 12., 16., 21., 27., 33., 45., 60., 100.
04., 08., 12., 16., 21., 27., 33., 45., 60., 100.
Configuration
LH: Left horizontal., LV: Left vertical., RH: Right horizontal., RV: Right vertical.
LH: Left horizontal., LV: Left vertical., RH: Right horizontal., RV: Right vertical.
LH: Left horizontal., LV: Left vertical., RH: Right horizontal., RV: Right vertical.
Accessories
FB-IAQ HE., FB-CA HE., FBL-HE., BA-AF HE., BA-AFC HE., BA-DX HE., AFR-HE., PRRE., SIL., ACOPEL F400., APC., APR., TPP-HE., 3-WAY VALVES WITH PROPORTIONAL ACTUATOR., REMV., LF-24S., SCO2-A 0/10V., SCO2-G 0/10V., TDP-S Probe.
FB-IAQ HE., FB-CA HE., FBL-HE., BA-AF HE., BA-AFC HE., BA-DX HE., AFR-HE., PRRE., SIL., ACOPEL F400., APC., APR., TPP-HE., 3-WAY VALVES WITH PROPORTIONAL ACTUATOR., REMV., LF-24S., SCO2-A 0/10V., SCO2-G 0/10V., TDP-S Probe.
FB-IAQ HE., FB-CA HE., FBL-HE., BA-AF HE., BA-AFC HE., BA-DX HE., AFR-HE., PRRE., SIL., ACOPEL F400., APC., APR., TPP-HE., 3-WAY VALVES WITH PROPORTIONAL ACTUATOR., REMV., LF-24S., SCO2-A 0/10V., SCO2-G 0/10V., TDP-S Probe.
Sustainability data
Material
Steel
Steel
Steel