Summary
The HTA solvent weld system is fully WRAS-approved for transporting hot and cold water. The range is complete with fittings, pipe and accessories such as valves, expansion compensators and clips
The HTA solvent weld system is fully WRAS-approved for transporting hot and cold water. The range is complete with fittings, pipe and accessories such as valves, expansion compensators and clips
Application
HTA is primarily for use in hot and cold water systems however it can also be used in heating systems where the temperature does not exceed 60 degrees C - such as with air source heat pumps and low temperature heating.
HTA is primarily for use in hot and cold water systems however it can also be used in heating systems where the temperature does not exceed 60 degrees C - such as with air source heat pumps and low temperature heating.
Description
HTA pipe is WRAS compliant and manufactured to a high level of industry standards. The smooth bore of HTA helps to generate energy savings by maintaining excellent pump efficiencies throughout its use. With no threat of corrosion, HTA pipes can also significantly reduce the costs of maintenance throughout the 50-year design life of the system.
A safe, simple and fast method of creating robust, permanent joints, HTA solvent weld fittings are fully WRAS approved for transporting hot and cold water. No specialist tools, electricity or hot works are required when joining HTA, this alongside the speed of installation can offer significant time and cost savings on site.
Features and benefits:
- Up to 16 bar pressure rating (32–160 mm).
- Up to 25 bar pressure rating (16–63 mm).
- No hot works required.
- Completely corrosion resistant.
- Fully WRAS approved.
- 50-year design life.
- Sizes 16 to 160 mm (DN10–150).
- Pipe marking to differentiate PN16 and PN25.
HTA pipe is WRAS compliant and manufactured to a high level of industry standards. The smooth bore of HTA helps to generate energy savings by maintaining excellent pump efficiencies throughout its use. With no threat of corrosion, HTA pipes can also significantly reduce the costs of maintenance throughout the 50-year design life of the system.
A safe, simple and fast method of creating robust, permanent joints, HTA solvent weld fittings are fully WRAS approved for transporting hot and cold water. No specialist tools, electricity or hot works are required when joining HTA, this alongside the speed of installation can offer significant time and cost savings on site.
Features and benefits:
- Up to 16 bar pressure rating (32–160 mm).
- Up to 25 bar pressure rating (16–63 mm).
- No hot works required.
- Completely corrosion resistant.
- Fully WRAS approved.
- 50-year design life.
- Sizes 16 to 160 mm (DN10–150).
- Pipe marking to differentiate PN16 and PN25.
Product certifications
Color
Brown
Brown
Finish
Smooth
Smooth
Material
Chlorinated polyvinyl chloride (PVC-C)
Chlorinated polyvinyl chloride (PVC-C)
Shape
Circle
Circle
Length
3000 mm, 4000 mm
3000 mm, 4000 mm
Width
16 mm, 20 mm, 25 mm, 32 mm, 40 mm, 50 mm, 63 mm, 75 mm, 90 mm, 110 mm, 125 mm, 160 mm
16 mm, 20 mm, 25 mm, 32 mm, 40 mm, 50 mm, 63 mm, 75 mm, 90 mm, 110 mm, 125 mm, 160 mm
Height
16 mm, 20 mm, 25 mm, 32 mm, 40 mm, 50 mm, 63 mm, 75 mm, 90 mm, 110 mm, 125 mm, 160 mm
16 mm, 20 mm, 25 mm, 32 mm, 40 mm, 50 mm, 63 mm, 75 mm, 90 mm, 110 mm, 125 mm, 160 mm
Warranty description
15 year
15 year
Specification
Classification data
Standards
-
-
Pipe
To NF EN 15877.
To NF EN 15877.
Fittings
To NF EN 15877.
To NF EN 15877.
Third-party certification
WRAS-approved.
WRAS-approved.
Pressure rating
PN25.
PN16.
Colour
Brown.
Brown.
Additional properties
Jointing
Solvent weld.
Solvent weld.
Nominal sizes
16 mm (DN10)., 20 mm (DN15)., 25 mm (DN20)., 32 mm (DN25)., 40 mm (DN32)., 50 mm (DN40)., 63 mm (DN50).
32 mm (DN25)., 40 mm (DN32)., 50 mm (DN40)., 63 mm (DN50)., 75 mm (DN65)., 90 mm (DN80)., 110 mm (DN100)., 125 mm (DN110)., 160 mm (DN150).
Bends
90° elbow: female., 45° elbow: female., Elbow with brass thread: female – female; female thread., 90° bend: female - female.
90° elbow: female., 45° elbow: female., Elbow with brass thread: female – female; female thread., 90° bend: female - female.
Adaptors
Male brass threaded adaptor, Type A: female or male; male thread., Male brass threaded adaptor, Type B; female or male; male thread., Female brass threaded adaptor: female or male; male thread., Three-piece male brass threaded union: female; male threaded., Three-piece female brass threaded union: female; female threaded., Elbow with brass thread: female–female, female thread., 90° brass threaded elbows: female; female threaded., Wall-mounted elbow with female brass thread: female; female threaded., Connection socket with EPDM seal, EPDM gasket and brass nut: male; female threaded., Stainless steel male threaded adaptor - 316L: female or male; male threaded., 90° threaded equal tee (metal reinforcing ring): female; female threaded., CPVC male threaded adaptor: female; male threaded., Female threaded adaptor with metal reinforcing ring: female or male; female threaded., Three-piece composite union: female – female., Three-piece threaded composite union: female – male thread., Flexible hose adaptor: male - female., Endcaps: female., Threaded spigot adaptors: male - female threaded., Half coupler.
Male brass threaded adaptor, Type A: female or male; male thread., Male brass threaded adaptor, Type B; female or male; male thread., Female brass threaded adaptor: female or male; male thread., Three-piece male brass threaded union: female; male threaded., Three-piece female brass threaded union: female; female threaded., Elbow with brass thread: female–female, female thread., 90° brass threaded elbows: female; female threaded., Wall-mounted elbow with female brass thread: female; female threaded., Connection socket with EPDM seal, EPDM gasket and brass nut: male; female threaded., Stainless steel male threaded adaptor - 316L: female or male; male threaded., 90° threaded equal tee (metal reinforcing ring): female; female threaded., CPVC male threaded adaptor: female; male threaded., Female threaded adaptor with metal reinforcing ring: female or male; female threaded., Three-piece composite union: female – female., Three-piece threaded composite union: female – male thread., Flexible hose adaptor: male - female., Endcaps: female., Threaded spigot adaptors: male - female threaded., Half coupler.
Adaptors and reducers
90° reducing tee: female., Reducer: male – female., Male reducer: male – female., Concentric reducer: male – female., 90° threaded reducing tee: female – female; female thread., 90° threaded reducing tee (metal reinforcing ring): female – female; female thread.
90° reducing tee: female., Reducer: male – female., Male reducer: male – female., Concentric reducer: male – female., 90° threaded reducing tee: female – female; female thread., 90° threaded reducing tee (metal reinforcing ring): female – female; female thread.
Pipe couplings
Socket, female., 90° equal tee.
Socket, female., 90° equal tee.
Fittings
Nipples: male - male., Stub flange, serrated: female., Thermal movement compensator., Quick connect brass fitting., Straub Plastgrip mechanical coupler., Flange kit., Flexible hose., Viton flat gasket., EPDM flat gasket.
Nipples: male - male., Stub flange, serrated: female., Thermal movement compensator., Quick connect brass fitting., Straub Plastgrip mechanical coupler., Flange kit., Flexible hose., White PN16 rotating flange (polyester fibre glass) DIN 16-966., PN16 rotating flange (polyamide fibre glass) DIN 16-966., Viton flat gasket., EPDM flat gasket.
Pipe collar
MONOKILP® collars., Wedges for MONOKLIP® collars.
MONOKILP® collars., Wedges for MONOKLIP® collars.
Accessories
Instrumentation thermo-coupler for contact thermometer: female–female., Instrumentation tee: female – female; female thread., Instrumentation tee with brass thread: female – female; female thread., Temperature probe., Temperature sensor (for thermocouplers)., Ball valve - flanged socket., Ball valve - double union.
Instrumentation thermo-coupler for contact thermometer: female–female., Instrumentation tee: female – female; female thread., Instrumentation tee with brass thread: female – female; female thread., Temperature probe., Temperature sensor (for thermocouplers)., Ball valve - flanged socket., Ball valve - double union.
Fire classification
To EN 13501-1/ EN 15015, B-s1,d0.
To EN 13501-1/ EN 15015, B-s1,d0.
Sustainability data
Contains Red List materials
No
No
Country of product manufacture
France
France
Material
Chlorinated polyvinyl chloride (PVC-C)
Chlorinated polyvinyl chloride (PVC-C)
Manufacturing plant location
Rue Robert Ancel, 76700 Harfleur, France
Rue Robert Ancel, 76700 Harfleur, France
Expected Life
50 year
50 year