Suitable for:

• Vertical and horizontal non-moving concrete construction joints.
• New to existing concrete construction.
• Irregular surfaces.
• Around through-wall penetrations, such as plumbing and utility pipes.
• Sealing around penetrations, concrete pilings and steel H-piles passing through the slab.
• Both continuous hydrostatic and intermittent hydrostatic conditions.

Suitable for:

• Vertical and horizontal non-moving concrete construction joints.
• New to existing concrete construction.
• Irregular surfaces.
• Around through-wall penetrations, such as plumbing and utility pipes.
• Sealing around penetrations, concrete pilings and steel H-piles passing through the slab.
• Both continuous hydrostatic and intermittent hydrostatic conditions.

A hydrophilic strip waterstop designed to stop water infiltration through cast-in-place concrete construction joints, by expanding upon contact with water to form a positive seal against the concrete.

Features and benefits:

• Expands to seal and fill voids and cracks in the concrete.
• Active waterstop designed to replace passive PVC/ Rubber dumbbell waterstops, thereby eliminating the requirement of special pieces, split-forming and seam welding.
• Has been successfully tested by independent testing firms to over 60 meters of hydrostatic water pressure, under both continuous immersion and wet/ dry-cycling.
• WATERSTOP-RX® 101 is produced in a rectangular shape measuring 25 x 20 mm and WATERSTOP-RX® 103 is produced in a rectangular shape measuring 20 x 10 mm.
• Though WATERSTOP-RX® possesses good resistance to many chemicals, the waterstop is not intended to be used as the primary joint sealant for chemical containment vessels.
• Consult manufacturer for guidance regarding chemical compatibility for secondary chemical containment applications.
• Additionally, WATERSTOP-RX® is not an expansion joint sealant; contact CETCO for expansion joint applications.
• Designed for reinforced structural concrete with a minimum of 20 N/mm² compressive strength.
• RX-101 is designed for concrete 200 mm thick or greater with two rows of reinforcing steel.
• RX-103 is designed for vertical concrete 150 mm thick or greater; and horizontal concrete no less than 100 mm thick. It should be used in concrete with one row of steel reinforcement, concrete curbs, planter walls, fountains and lightweight structural concrete.
• Can be used around pipe and structural penetrations.
• CETSEAL is required to secure WATERSTOPRX ® to metal or PVC (pipe) surfaces. Mechanical fixings should be used with REVO-FIX to secure WATERSTOP-RX; and fixings can be used in conjunction with CETSEAL.
• WATERSTOP-RX® is not a self-adhering product. Either CETSEAL or REVO-FIX are required to secure WATERSTOP-RX® to concrete.
• Mechanical fixings should not be used to secure WATERSTOP-RX alone. Do not use any other adhesive or construction sealant apart from CETSEAL to secure WATERSTOP-RX®.
• WATERSTOP-RX® is not designed, nor intended to function as an expansion joint sealant. For precast concrete applications, contact manufacturer for product suitability and for any special installation requirements.
• WATERSTOP-RX® products are designed for structural concrete with a minimum of 20 N/mm² compressive strength.

A hydrophilic strip waterstop designed to stop water infiltration through cast-in-place concrete construction joints, by expanding upon contact with water to form a positive seal against the concrete.

Features and benefits:

• Expands to seal and fill voids and cracks in the concrete.
• Active waterstop designed to replace passive PVC/ Rubber dumbbell waterstops, thereby eliminating the requirement of special pieces, split-forming and seam welding.
• Has been successfully tested by independent testing firms to over 60 meters of hydrostatic water pressure, under both continuous immersion and wet/ dry-cycling.
• WATERSTOP-RX® 101 is produced in a rectangular shape measuring 25 x 20 mm and WATERSTOP-RX® 103 is produced in a rectangular shape measuring 20 x 10 mm.
• Though WATERSTOP-RX® possesses good resistance to many chemicals, the waterstop is not intended to be used as the primary joint sealant for chemical containment vessels.
• Consult manufacturer for guidance regarding chemical compatibility for secondary chemical containment applications.
• Additionally, WATERSTOP-RX® is not an expansion joint sealant; contact CETCO for expansion joint applications.
• Designed for reinforced structural concrete with a minimum of 20 N/mm² compressive strength.
• RX-101 is designed for concrete 200 mm thick or greater with two rows of reinforcing steel.
• RX-103 is designed for vertical concrete 150 mm thick or greater; and horizontal concrete no less than 100 mm thick. It should be used in concrete with one row of steel reinforcement, concrete curbs, planter walls, fountains and lightweight structural concrete.
• Can be used around pipe and structural penetrations.
• CETSEAL is required to secure WATERSTOPRX ® to metal or PVC (pipe) surfaces. Mechanical fixings should be used with REVO-FIX to secure WATERSTOP-RX; and fixings can be used in conjunction with CETSEAL.
• WATERSTOP-RX® is not a self-adhering product. Either CETSEAL or REVO-FIX are required to secure WATERSTOP-RX® to concrete.
• Mechanical fixings should not be used to secure WATERSTOP-RX alone. Do not use any other adhesive or construction sealant apart from CETSEAL to secure WATERSTOP-RX®.
• WATERSTOP-RX® is not designed, nor intended to function as an expansion joint sealant. For precast concrete applications, contact manufacturer for product suitability and for any special installation requirements.
• WATERSTOP-RX® products are designed for structural concrete with a minimum of 20 N/mm² compressive strength.