Suitable for supporting masonry concrete or steel framed structures.

Consisting of a traditional support angle capable of supporting masonry over 9.0 m in height and can be fixed to concrete framed structures with the use of ‘T’ head bolts into cast-in channels, site drilled expansion bolts or resin anchor products. Fixing to steel framed structure using coated setscrews or the Wincro RHS Blind Bolt for hollow fixing.

Type:

• WSCFA/T: Standard arrangement using cast in channel to slab edge.
• WSCFA/E: Standard arrangement using site drilled expansion bolts.
• WSCFA/R: Standard arrangement using site drilled resin anchor bolts.
• WSCFA/S: Standard arrangement using isolated bolts to structural steelwork.
• WSCFA/BB: Standard arrangement using isolated bolts to RHS structural frames.
• WSCFA/-/IA: Inverted angle to suit coursing.

Features and benefits:

• Normally supplied in lengths up to 3.0 m with either serrated vertical slots or welded serrated patches where vertical adjustment needs to be designed into the system.
• Where horizontal adjustment has been accommodated in the structure, the system can be supplied with horizontally slotted holes.
• Can also be supplied inverted to accommodate situations where the coursing level/horizontal movement joint is above the fixing position.
• Drawings are provided showing the location of fixings and all angle units are fully referenced and scheduled.
• Other variations/ configurations available, consult manufacturer for details.
• Angles can also be supplied curved on plan to suit radiused masonry.
• All details are submitted for approval before manufacture.
• CE marked to BS EN 1090-1.