NBS Source
I'm a manufacturer

Compare variants

Kalzip Standing Seam - Liner Roof System - Standing Seam Roofing and Cladding
Kalzip Standing Seam - Liner Roof System - Standing Seam Roofing and Cladding
Kalzip Standing Seam - Liner Roof System - Standing Seam Roofing and Cladding

Last verified by manufacturer 2 months ago

Kalzip Ltd

Last verified by manufacturer 2 months ago

Kalzip Ltd

Last verified by manufacturer 2 months ago

Kalzip Ltd
Summary
Kalzip standing seam system comprising of aluminium outer skin, E-clips and tophats with lightweight non-combustible insulation, vapour control layer and an inner trapezoidal liner sheet over purlins.
Third party certification
Color
Bronze, Gold, Copper, Other
-
-
Finish
Galvanized, Textured, Anti-graffiti, Anodized, Coated, Copper, Embossed, Metallic, Gloss, Mill, Matt, PVdF, Painted, Powder-coated, Pre-weathered, Stainless steel
-
-
Material
Aluminium, Copper, Stainless steel, Zinc, Steel, Rock mineral wool, Glass mineral wool, Metal
-
-
Shape
Other
-
-
Length
Bespoke
-
-
Width
Bespoke
-
-
Height
Bespoke
-
-
Warranty description
Other, 15 year, 20 year, 25 year, 30 year, 35 year, 40 year, Ten year
-
-

Specification

Liner sheets
-
-
-
Material
Kalzip Trapezoidal liner sheet in galvanised steel to BS EN 10326. 0.7 mm (Nominal) with Enamel White coating., Kalzip Trapezoidal liner sheet in aluminium 0.9 mm Stucco Embossed.
-
-
Primary fasteners
5.5 mm diameter carbon steel self-drilling fasteners (SD-3-T15-5.5x25).
-
-
End and side laps
Side laps to be stitched at maximum 400 mm centres with 4.8 mm diameter carbon steel self-drilling stitching fasteners (SL2-T-4.8x20).
-
-
Air and vapour control layer
-
-
-
Material
Kalzip VCL Clear - Reinforced virgin polyethylene with 530 MNs/g vapour resistivity.
-
-
Sealing
Seal with one row of sealant tape, not less than 50 mm.
-
-
Spacers
Support clips, steel reinforced polyamide Kalzip E-clips type E160 fixed to 30 mm deep steel tophats channels.
-
-
Thermal insulation
Kalzip Plus40 Insulation, 205 mm.
-
-
Firestops
To accurately match sheet profile. Adhesive recommended by profile filler manufacturer.
-
-
External sheets
-
-
-
Material
Kalzip Standing Seam 50/333., Kalzip Standing Seam 50/429., Kalzip Standing Seam 50/444.
-
-
Primary fasteners
6 mm diameter stainless steel torque controlled fasteners (SDK3-S-377-6.0x45). Position and frequency to be determined by calculation by Kalzip Technical.
-
-
Secondary fixings
Steel tophats to be secured to steel saddles at purlin positions. Position and frequency to be determined by calculation by Kalzip Technical.
-
-
End and side laps
Sheets to be supplied in continuous lengths and mechanically seamed to support clips with Kalzip zipping machine.
-
-
Fascia
-
-
-
Material
Cappings, closure pieces, flashings, trims, gutters, fillers, spacers, tapes, sealants, fixings, etc, where not specified, to be types recommended by the cladding manufacturer.
-
-
Fasteners
Type(s), size(s), material(s) and finish(es) as specified, or in the absence of such specification, as recommended for the purpose by the cladding manufacturer.
-
-
Soffit
-
-
-
Material
Soffits, where not specified, to be recommended by the cladding manufacturer.
-
-
Support
Frequency of soffit supports determined by project engineer.
-
-
Gutters
-
-
-
Material
Gutters to be sourced through the Kalzip approved installer. Detailed as per Kalzip standard details and recommendations.
-
-
Support
Frequency of gutter supports determined by project engineer.
-
-
System accessories
Extruded aluminium alloy (EN AW-6061) gable end hooks. Extruded aluminium alloy (EN AW-6063) drip angle 40 x 20 mm. Extruded aluminium alloy (EN AW-6063) flat bar 22 x 6 mm. Extruded aluminium alloy (EN AW-6063) gable end channel. Extruded aluminium alloy (EN AW-6063) tolerance gable clip extrusion. Fabricated aluminium alloy (EN AW-3004) flashings. Fabricated aluminium alloy (EN AW-3004) ridge closures (KZ 65/400). Fabricated welded soaker units. Kalzip profile eaves fillers. Kalzip profile ridge fillers.
-
-

Additional properties

Thermal transmittance (U-Value)
0.20 W/m²K.
-
-
Bearing width
58 mm (minimum).
-
-
Type
Kalzip profiled fillers - Closed cell cross-linked polyethylene with a minimum density of 30 kg/m³.
-
-
Thickness
-
-
-
Finish
Aluminium, AluPlusPatina., Aluminium, natural stucco embossed., Aluminium, with a PVDF paint coating., Aluminium, with an HPC paint coating., AluPlusZinc., Copper., Stainless steel.
-
-
Shape
-
-
-
Dimensions
-
-
-
Third-party certification
British Board of Agrément Certification No. 98/3481.
Institute fur Bautechnic Zulassungbescheid N R 14.1-181.
-
-
Movement joints
Leave space between sheets to coincide with structural movement joints. Fix weathertight movement joint cover to sheets on one side only. Movement joint cover detail to be as per Kalzip Ltd recommended detail KZ-0-MISC-K-8-006.
-
-
Fixing method
Fixing sheets generally:
Remove all drilling swarf, dust, debris and any other foreign matter before finally fixing sheets into position. Protect sheets adequately during fixing and up to practical completion against mechanical damage, corrosion and disfigurement. Rectify any defects as quickly as practicable to minimise damage and nuisance. Install fasteners to correct tightness using any special tools recommended by the manufacturer.
-
-
Installation
Kalzip sheets to be installed by mechanically seaming sheets to support clips with Kalzip zipping machine.
Kalzip sheets to be installed as per cladding manufacturer's instructions, British Board of Agrément Certification No. 98/3481 and Institute fur Bautechnic Zulassungbescheid N R 14.1-181.
Only roofing contractors who are members of Kalzip Ltd’ approved roofing contractors programme should be employed to install Kalzip roofing.
Approved roofing contractor is to provide on site fully trained.
-
-

Sustainability data

Contains Red List materials
No
-
-
Country of material origin
Germany
-
-
Country of product manufacture
United Kingdom
-
-
Material
Aluminium, Copper, Stainless steel, Zinc, Steel, Rock mineral wool, Glass mineral wool, Metal
-
-
Manufacturing plant location
110 Hall Wood Ave, Saint Helens WA11 9WB, UK
-
-
Embodied carbon
9.61 kg CO₂ eq/kg
-
-
Recyclability
Excellent
-
-
Recycled content
100 %
-
-
Expected Life
40 year
-
-