For use in heavy duty applications such as multiple truss units, main trimmer joists, purlin to beam connections or similar situations where unusually heavy loads occur.

All hangers are manufactured from 1.5mm thick galvanised steel. Bolt hole to suit M12 fixing, nail holes 5mm diameter. Produced from galvanised steel to BS EN 10346 + G275 as standard. Stainless steel hangers are available to order. Bearing surface on all multi-truss hangers is 75mm.

MTH/240 Multi-Truss Hangers:

• Supports multiple trusses from primary girder, purlin to beam connections and main trimmer joists. Used for joining timber to timber, masonry or concrete. For higher overall load performance.

MTH/340 Multi-Truss Hanger:

• For use in heavy duty applications such as multiple truss units, main trimmer joists, purlin to beam connections or similar situations where unusually heavy loads occur.

MTH/380 Multi-Truss Hanger and MTH/CF/380 concealed flange;

MTH/500 Multi-Truss Hanger and MTH/CF/500 concealed flange;

MTH/620 Multi-Truss Hanger and MTH/CF/620 concealed flange:

• For use in heavy duty applications such as multiple truss units, main trimmer joists, purlin to beam connections or similar situations where unusually heavy loads occur.
• Each model is available with face plates folded inwards for concealed fixings (CF codes).