• Can be installed directly to concrete ceilings or suspended ceiling systems (plasterboard).
• Horizontal, sloped or vertical surfaces.
• Seamless, even surfaces up to areas of 500 m² on concrete and 100 m² on plasterboard, suspended systems.
• Shallow vaulted surfaces.
• Suitable for use in commercial and industrial buildings and most public areas.

Thermal-acoustic lining system which reduces the reverberation time in ceilings and wall surfaces and controls the temperature of a room. It uses an embedded capillary pipe system to provide efficient radiant heating and cooling.

Features and benefits:

• Broadband sound absorption up to αw 0.65/ Class C.
• Cooling capacity at Δt = 8 K: 79 W/m² (to BS EN 14240).
• Heating capacity at Δt = 15 K: 117 W/m² (to BS EN 14037-2).
• Minimal installation height.
• Smooth, seamless surface.
• Full airflow management and airtight system to prevent localized accumulation of airborne particles.
• Full maintenance, cleaning and repair solutions available (BASWA Clean, BASWA Blonde, BASWA Fresh etc.).
• Installation only by BASWA certified operatives.
• Building material flame-retardant Class B-s1, d0 according to BS EN 13501-1.
• CE certified/ ETA-No:16/ 0144 (CSTB).
• Large space water transporting capillary pipe mats are installed close to the surface.
• Require minimum space and energy.
• Provide draft-free and noiseless room temperature control, paired with sound absorption.
• Delivers heating and cooling efficiency due to the small amount of acoustic rendering coverings and the surface proximate installation, as well as the heat conductivity of the mineral-based acoustic stucco.
• Minimum system thickness of 30mm.
• Unlimited choice of colours (RAL, NCS, etc.).
• Can be used in Minergie Eco projects.
• VOC: Indoor Air Comfort Gold label.
• Suitable for allergy sufferers.
• Sustainable and ecological through combination and use regenerative energies.
• Cooling without colds: promotes health through improved indoor climate.
• Increases the performance and concentration ability.

Components:

• BASWA Fix C cementitious adhesive mortar or BASWA Fix K gypsum adhesive mortar.
• BASWA Phon acoustic panel.
• Capillary tube mats PPR.
• BASWA Fill injected filler layer.
• BASWA Base first coat layer.
• BASWA Base, Fine or Top surface layer.
• Panel adhesive: BASWA Fix C, Material – Portland cement, calcitic aggregates and mating admixtures.
• Panel adhesive: BASWA Fix K, Material – Plaster, calcium carbonate, resin and reagent. Drying time (at 20°C/ 50% RH): Hard: 1–1.5 hours; dry: 24 hours.