ITP UltraBlock is a range of thermo-reflective air and vapour control layers (AVCLs) incorporating encapsulated aluminium foil to maximize energy efficiency. The reflective foil surface improves the insulation characteristics of the installation, reflecting heat back into the building.

Air & vapour control layers (AVCLs) ensure that the building envelope is properly sealed to control ventilation and prevent heat loss in compliance with Building Regulations Part L. Installed on the warm side of insulation AVCLs prevent moisture within the building's warm air from reaching the insulation therefore protecting insulates from interstitial condensation.

ITP UltraBlock membranes contribute to both BS 9250 for the airtightness in ‘a well-sealed ceiling’ and BS 5250 aiding the control of condensation within a roof space.

Features and benefits:

Suitable for roof and wall installations.
Reinforcement scrim.
Air barrier for controlling ventilation.
Reflective foil layer for enhanced retention of thermal energy.
Exceptional water vapour resistance.
ITP UltraBlock 300 - suited to high-humidity builds >25,000 MNs/g.
ITP UltraBlock 200 - for general builds > 630 MNs/g.
ITP UltraBlock SA - Self-adhesive version available.
CE approval.

Accessories:

ITP FlameOUT S/S Sealing Foil Tape:

Single-sided tape used to seal thermo-reflective vapour barriers VCLs.
Size: 50 mm x 47.5 m.
Colour: silver.
Flame retardancy: Class 0, parts BS 476 Parts 6&7.
Thickness: 30 microns.
Temperature range: -20°C to +70°C.
Installation range: +4°C to +35°C.