A-Z
Showing 73-108 of 125
Delta ISO Certificate
Delta Membrane Systems Ltd
Development, production and sales of roof membranes, insulating materials, accessories for structural and civil engineering, house lacquer and MixPlus-Systems, paste systems and tinting technologies as well as Microlayer Corrosion Protection Systems
Delta LM 800 Product Data Sheet
Delta Membrane Systems Ltd
Delta LM 800 is an innovative, robust and flexible liquid membrane suitable for damp proofing, waterproofing and ground gas protection conforming to BS 8102:2022 and BS 8485:2015+A1:2019.
Delta LM 800 performs excellent under high compressive loads and offers maximum protection in just one application.
Delta LM 800 offers a simple and continuous prevention barrier against the ingress of methane, carbon dioxide and radon and moisture into buildings.
Delta LM 800 is an elastic, UV-resistant, single component system supplied in black. This non-hazardous product can be applied direct from its packaging using a roller, brush or airless spray.
Delta MS 20 Access Port Product Data Sheet
Delta Membrane Systems Ltd
MS20 Access Ports are designed to allow for inspection of the Type C Drainage Systems & are a suitable access for flushing the system. Where large floor areas are being covered or where modular sub floor drainage or perimeter channel and sub floor drainage are used then the inclusion of the MS20 Access port ensures all aspects of the system can be maintained.
Delta MS 20 Declaration of Performance
Delta Membrane Systems Ltd
Delta MS 20 – Cavity Drain Membrane.
Delta MS 20 is a High Density Polyethylene (HDPE) high drainage cavity drain membrane with superior drainage capacity and compressive strength. Delta MS 20 is suitable for use as a high performance water control and management system in building and civil engineering construction. A superior solution for waterproofing basement floors and walls.
The Declaration of Performance is a key part of the Construction Products Regulation. It provides information on the performance of a product. Each construction product covered by a European harmonised standard or for which a European Technical Assessment has been issued needs this Declaration and has to be CE marked.
Delta MS 20 Product Data Sheet
Delta Membrane Systems Ltd
Delta MS20 is a High Density Polyethylene (HDPE) cavity drain membrane with superior drainage capacity and compressive strength.
Delta MS20 is suitable for use as a high performance water control and management system in building & civil engineering construction. A superior solution for waterproofing basement floors and walls.
Delta MS 500 Declaration of Performance
Delta Membrane Systems Ltd
Delta MS 500 – Cavity Drain Membrane
DELTA MS 500 is a cavity drain membrane that is used for waterproofing on walls, floors and vaulted ceilings, above and below ground, in new construction or in existing buildings over a contaminated or damp background.
Delta MS 500 is an 8mm studded profile High Density Polyethylene (HDPE) clear cavity drainage membrane suitable for use on the internal faces of walls and floors as a water control & drained management system for protection of sub-ground structures against potentially adverse effects of ground water ingress.
The Declaration of Performance is a key part of the Construction Products Regulation. It provides information on the performance of a product.
Delta MS 500 Fire Retardant Fleece Tape Product Data Sheet
Delta Membrane Systems Ltd
Delta Fire Retardant Fleece Tape has been designed for use with our Delta MS 500 Fire Retardant membranes.
Delta Fire Retardant Fleece Tape is a high-performance fleece backed butyl waterproof sealing tape for butt joints and overlapping of membranes. This flexible, self-adhesive tape enables the sealing of membranes together, at joints or where overlapping.
Delta MS 500 Fire Retardant Membrane Product Data Sheet
Delta Membrane Systems Ltd
Delta MS 500 Fire Retardant is a BBA certified 8mm studded cavity drain membrane with a Euroclass fire rating of B-S2, d0 (EN 13501-1:2018).
Delta MS 500 Fire Retardant is suitable for use on internal faces of earth retained walls, floors, and vaulted ceilings as a water management system for the protection of below ground structures against the potentially adverse effects of ground water ingress.
Delta MS 500 Product Data Sheet
Delta Membrane Systems Ltd
Delta MS500 is an 8mm studded profile High Density Polyethylene (HDPE) clear cavity drainage membrane.
Suitable for use on the internal faces of walls and floors as a water management system for the protection of below ground structures against the potentially adverse effects of ground water ingress.
Delta MS Decloration of Performance
Delta Membrane Systems Ltd
Delta MS is a High Density Polyethylene (HDPE) high drainage cavity drain membrane with superior drainage capacity and compressive strength used for structural waterproofing projects and below ground structures.
The Declaration of Performance is a key part of the Construction Products Regulation. It provides information on the performance of a product. Each construction product covered by a European harmonised standard or for which a European Technical Assessment has been issued needs this Declaration and has to be CE marked. This helps increase transparency and improves the functioning of the Single Market.
Delta Podium Deck Brochure (Waterproofing & Drainage Protection)
Delta Membrane Systems Ltd
This 44-page, full colour brochure presents design and build philosophy, project detailing and specification/selection of the correct waterproofing and drainage protection systems for podium decks, buried roofs, blue roofs, green roofs, warm roofs, cold roofs, hybrid roofs, car parks and terraces & balconies.
Deltas Podium Deck Brochure is divided into key sections and features an array of easy-to-read text, technical drawings, detailing and 2D graphics.
Delta Product Catalogue
Delta Membrane Systems Ltd
Designed to be easy-to-use in an eco-friendly, A5 pocket size. Offering high quality visuals all organised into easy to navigate colour coded sections (from Ground Gas Protection to Concrete Repair) ensuring customers can quickly and easily source and order the right product for their project.
Our introduction section explains more about Delta including our core services in supporting correct project specification and application. From waterproofing Types: A, B to C, with over two hundred products listed, this catalogue will help you specify a robust, long-lasting, and efficient waterproofing approach.
Delta PT Declaration of Performance
Delta Membrane Systems Ltd
Delta PT (including Delta PT/Plaster Lath and PT Slimline) is a High Density Polyethylene (HDPE) cavity drain membrane. Delta PT has been designed to incorporate a plastic mesh which is welded to the surface of this dimpled sheeting membrane. Suitable as an impermeable damp proofing base for plaster or shotcrete (and as a water control and drainage membrane) in tunnel construction or for remedial damp proofing and waterproofing of existing basements internally.
The Declaration of Performance is a key part of the Construction Products Regulation.
Delta PT Plugs Product Data Sheet
Delta Membrane Systems Ltd
Delta Plugs are specially designed to provide a fixing point for the Delta Type C Cavity Drain membranes.
Delta Fixing Plus when used in conjunction with Delta Rope offer a watertight seal. These plugs have a centrally located internal shank which can accommodate a 5.5mm dia/size 12 screw at a minimum depth of 30mm for subsequent installation of wall ties and/or dry lining systems.
Delta PT Product Data Sheet
Delta Membrane Systems Ltd
Delta PT is an 8mm studded Type C, Cavity Drainage Membrane that is suitable for use in basement waterproofing for new and existing structures.
Delta PT can also be used in above ground application to provide a damp proof barrier and to isolate plaster finishes from contamination.
Delta PT is a High-Density Polyethylene (HDPE) 8mm studded membrane with a heat welded polypropylene mesh.
Delta PT is suitable as an impermeable damp proofing base for plaster or shotcrete (with suitable reinforcement) and as a water control and drainage membrane in tunnel construction or for remedial damp proofing and waterproofing of existing basements internally.
Delta Qwik-Seal Plug Product Data Sheet
Delta Membrane Systems Ltd
Delta Qwik-Seal Plugs are a watertight self- sealing plug suitable for our MS500 & Delta PT membranes.
The rubber sealing grommet which is supplied with the Delta QwikSeal plug, seals the plug when it is hammered into the membrane or substrate to give a waterproof seal. There is no need for Delta rope in this method of application to create a suitable seal.
Delta Roof Guard - Cold Liquid Applied Waterproofing
Delta Membrane Systems Ltd
Product Brochure on Delta Roof Guard, Cold Liquid Applied Waterproofing
Delta Sealing Rope Product Data Sheet
Delta Membrane Systems Ltd
Delta Rope is a dependable seal for Delta fixing plugs which do not have grommets.
Delta Rope is ideal for sealing joints in Delta MS 20 membrane and in stud-to-stud joints between adjacent sections in membranes. Also used in association with Delta Cornerstrip to seal around service penetrations
Delta Tape Product Data Sheet
Delta Membrane Systems Ltd
Delta Tape is used in application for joining membranes.
Sealing Tape is a double-sided butyl strip sealant typically used for sealing overlaps and membranes together in a Delta Type C Cavity Drainage System. Available as a 22.5m x 28mm roll.
Delta Ultra Fix Fixing Plug Product Data Sheet
Delta Membrane Systems Ltd
Delta Ultra Fix Plugs are specifically designed to fix and secure the Delta MS 500 Fire Retardant, PT, PT 3mm, MS 500 and Delta AT 800 membranes. Delta Ultra Fix Plugs offer a tailor-made maximum hold for ease of installation. These high-quality high impact polymer plugs are available with or without grommets. The uniquely designed Delta Ultra Fix plugs can be hammered into pre-drilled holes using a rubber
mallet for a continuous waterproof installation. Delta Ultra Fix Plugs are Fire retardant (without grommet).
Delta V3 Foul Installation Guide
Delta Membrane Systems Ltd
Installation Guide for Delta V3 Foul Submersible Packaged Pump Station
DELTA-DRAIN
Delta Membrane Systems Ltd
DELTA-DRAIN provides reliable surface drainage for cellar and retaining walls as well as roof gardens by filtering out fine-grained soil particles, ensuring constant water drainage, and permanently protecting foundation walls.
Delta-Drain installation instructions
Delta Membrane Systems Ltd
Installation instructions for the Delta-DRAIN from Delta Membrane Systems give full details on the most effective method of fixing for this product range.
Delta-DRAIN overcomes the potential problems that might occur with earth boundary construction elements such as foundation walls. It provides reliable surface drainage for cellar and retaining walls as well as roof gardens, by filtering out fine-grained soil particles, ensuring constant water drainage, and permanently protecting foundation walls.
The installation instructions show how the dimpled sheet and the geotextile are installed so that they overlap at the edges, and are held in place using specifically designed Delta-HAFTNAGEL fixings which assist installation but do not replace the mecahnical fasteners applied from the outside.
DELTA-FLORAXX TOP
Delta Membrane Systems Ltd
DELTA-FLORAXX TOP drainage membrane features an integrated geotextile for perfect green roofs, and innovative octagonal dimples for very high compressive strength. This means drainage, water storage and filtration duties are carried out by one sheet which is easy and quick to lay out straight from the roll.
DELTA-FLORAXX TOP is the ideal solution for flat roofs which are to be extensively planted with greenery that does not need much care. The octagonal dimples are additionally reinforced by ribs to make it highly compression-resistant, so that it will sustain even heavy loads safely. It therefore provides an extremely serviceable and economical foundation for green roofs.
DELTA-FLORAXX TOP - Water Retaining Drainage Sheet
Delta Membrane Systems Ltd
Water-retaining drainage sheet in the DELTA-FLORAXX TOP range rom Delta Membrane Systems features an integrated geotextile for perfect green roofs, and innovative octagonal dimples for ourstanding compressive strength. This means drainage, water storage and filtration duties are carried out by one sheet which is easy and quick to lay out straight from the roll.
DELTA-FLORAXX TOP is the optimum solution for flat roofs which are to be extensively planted with greenery that does not need much care. The octagonal dimples are additionally reinforced by ribs to make it highly compression-resistant, so that it will sustain even heavy loads safely. It therefore provides an extremely serviceable and economical foundation for green roofs.
Delta-Gas Barrier System
Delta Membrane Systems Ltd
With Radon being a threat to many parts of the UK, Delta Membrane Systems offers an effective barrier to this deadly gas in the form of Delta-Gas Barrier System.
Natural, inert and radioactive, Radon gas has the potential of causing lung cancer in humans. It comes from the minute amounts of uranium that occur naturally in all rocks and soils, and is present in all parts of the UK – with ‘hot spots’ dotted around the country where the problem is considerably more serious.
Radon has to be prevented from entering a building in the first place, and Delta-Gas Barrier is ideally suited to this task. Conforming to BR 211, BR 212 and Building Regulations Document C, the barrier has the added advantage of giving totally dependable protection layer against rising damp.
Delta-Geo-Drain Quattro Four-ply Drainage Sheet
Delta Membrane Systems Ltd
Effective foundation protection for thick viscoplastic coatings is offered with Delta-Geo-Drain Quattro from Delta Membrane Systems – even if driving rain is able to penetrate through an imperfectly installed upper edge trim.
In an absolutely watertight system, such rainwater would exert hydrostatic pressure on the waterproof coating.
However, Quattro’s micro-perforated slip film which – together with the additional filter cloth – acts as a backup drainage layer behind the dimpled sheet to ensure that any water is drained off safely.
In addition, the slip film prevents the transmission of movement to the waterproof coating.
The laminated cloth – which sits between the film itself and the dimpled sheet – soaks up the moisture and then, in effect, acts as a wick to drain the moisture.
Delta-MS 20 Drainage System
Delta Membrane Systems Ltd
Highly resistant to compression and degradation in soil, Delta-MS 20 is a general purpose seepage layer for long-term safety from Delta Membrane Systems.
This product is suitable for application as a cost-effective horizontal or vertical permanent shuttering between a shotcrete shell or curtain wall, and a concrete structural wall.
It will drain water emerging from the rocky subsoil when vertically applied, and controls rising underground water when laid horizontally between the foundation and the surface layer of a carriageway, and conveys it towards the drain.
Delta-MS 20 is also ideal for coping with water-related problems in tunnel construction. With the dimples facing outwards, the sheet forms a continuous system of channels by which water is guided towards the drain.
DELTA-MS DRAIN
Delta Membrane Systems Ltd
wallsThe innovative sheet for dry cellar walls. Dimpled sheet with an integrated drainage layer. Simple and cost-efficient foundation for dry cellar walls. Improved performance, improved protection.
Delta-MS Installation Information
Delta Membrane Systems Ltd
Installation instructions for the Delta-MS range are given in a two-page leaflet from Delta Membrane Systems.
Clear and concise information is given on how the product is fixed facing the building. The material may be applied directly to compression-resistant waterproofing such as bitumen coatings or mineral sealing slurries, waterproof concrete, or insulation panels.
The information on the correct method of installation saves time for the fitter and eliminates any risk of failure.
Details are given on how the sheets are to be applied, the overlap demands, and the recommended fixings used for effective installation.
Delta-MS Protection System
Delta Membrane Systems Ltd
High compressive strength is a feature of the Delta-MS dimpled sheet from Delta Membrane Systems, with further benefits including low point loads and fast, tailored application straight from the roll on perimeter insulation, sealing slurries and waterproof concrete.
This sheet offers outstanding safety in building, underground and civil engineering construction. It may be used as a sub-base course under concrete floor slabs, for foundation wall protection, and as a seepage layer in cavity walls.
There are more than 1800 dimples per m for efficient pressure distribution and low point loads, even on perimeter insulation.
Delta-MS is capable of safely separating foundation walls from moist soil for all-round protection of compression-resistant waterproofing coats or perimeter insulation.
Delta-MS Sub-base Course Installation Instructions
Delta Membrane Systems Ltd
Offered as an efficient and cost-effective alternative to traditional sub-base courses Delta-MS , a dimpled sheet, is made from high-density polyethylene (HDPE), and is supplied in roll form for quick and easy laying. Resistant to acids, alkaline, oils and solvents, the material has a high compressive strength in the region of 250kN/m2. The design of the sheet ensures good pressure distribution and low point loads. It also protects the foundation slab from rising damp, and cement grout from seeping into the ground. Each sheet overlaps the next by at least 200mm for an effective seal, and specially-designed spacers ensure steel reinforcement sits above the membrane at a consistent level.
Delta-MS Sub-base Course Protection System
Delta Membrane Systems Ltd
Offered as an efficient and cost-effective alternative to traditional sub-base courses Delta-MS , a dimpled sheet, is made from high-density polyethylene (HDPE), and is supplied in roll form for quick and easy laying. Resistant to acids, alkaline, oils and solvents, the material has a high compressive strength in the region of 250kN/m2. The design of the sheet ensures good pressure distribution and low point loads. It also protects the foundation slab from rising damp, and cement grout from seeping into the ground. Each sheet overlaps the next by at least 200mm for an effective seal, and specially-designed spacers ensure steel reinforcement sits above the membrane at a consistent level.
Delta-NP Drain Installation Instructions
Delta Membrane Systems Ltd
Both vertical and horizontal applications of Delta-NP Drain are covered in a two-page Installation Instructions leaflet from Delta Membrane Systems.
This leaflet gives the proper installation criteria to follow for effective installation of Delta-NP Drain just one of a wide range of products from the company.
Delta-NP Drain Protection and Drainage System
Delta Membrane Systems Ltd
High drainage capacity through specially-configured dimples is offered by Delta Membrane Systems with its Delta-NP Drain – a compact two-ply composite sheet that keeps its shape perfectly, even under high pressure.
Suitable for vertical and horizontal applications, this product promotes constant water drainage, and offers rot resistance and cost-effective installation.
The dimple part of the sheet gives a high compressive strength of about 150kN/m2, and gives dependable vertical and horizontal drainage in civil engineering applications, retaining walls of all kinds, open tunnels and underground parking lots.
Bonded to the dimpled sheet is a geotextile layer which filters out fine soil particles – ensuring a constant flow of water to the drainage.
DELTA-TERRAXX
Delta Membrane Systems Ltd
For all compression resistant waterproof coatings.
Showing 73-108 of 125