A-FIX-WIND-SAFE Wind Uplift Solution - Permanent Bond Adhesive
Verified by manufacturer 3 months ago
Wind Uplift Test Certificate
Certificate type
A-FIX-WIND-SAFE is for use with Buzon pedestals and rail systems as an invisible fix to secure pavers on terraces and balconies where wind uplift might be an issue.
Application
For use on balconies and terraces with loose laid tiles, A-FIX-WIND-SAFE secures tiles to the pedestal solution.
Description
A-FIX-WIND-SAFE is a two-part, 3:1 ratio epoxy grade adhesive, which bonds tiles to the Buzon pedestal or rail solution.
Features and benefits:
- Class A fire-rated: A-FIX-WIND-SAFE works with Buzon’s non-combustible A-PED range, as well as pedestals and rails which form part of BROOF(t4) certified systems, the PB, DPH, and ALUrail ranges.
- As a non-mechanical hidden fix that requires no modifications to pavers or tiles, it is suitable for retrofit on existing sites identified as a cause for concern, as well as being a cost-effective solution for new projects.
- Can be used with porcelain, ceramic or concrete tiles.
The product was tested with different configurations of Buzon pedestals and 20 mm porcelain. All configurations were subjected to the following tests:
- Stepped increase test.
- Cyclic wind loading, open ended.
- Cyclic wind loading, blanked.
- Static load tests.
Consult manufacturer's literature for design loads when used in conjunction with other Buzon products.
General information
Color | Beige Grey |
Finish | Other |
Material | Guidance for specification option: Non-shrink epoxy. |
Shape | Formless |
Uniclass | |
CAWS | J31/375 Paving tiles Q25/480 Support pedestals Q37/460 Support pedestals K41/130 Raised access floor K41/130 Raised access floor |
Product range |
Specification data - Epoxy resin-based adhesives
Form | Two-component.Guidance for specification option:
|
Carrier | Solvent-free. |
Total VOCs (maximum) | EMICODE EC1.Guidance for specification option: A+ rating (low emissions). |
Open time (minimum) | 225 minutes at 10°C; 90 minutes at 20°C; 45 minutes at 30°C; 26 minutes at 40°C.Guidance for specification option: Gel time i.e. the working time and is the length of time that one can work with the adhesive before it sets. See below for cure time details. |
Colour | Medium grey. |
Fire performance | To EN 13501-1, A2-s1,d0. |
Density | 1.57 kg/L at 25°C. |
Application temperature range | 10–30°C. |
Cure time | Dry conditions: 2 hours (minimum, 40°C). 34 hours (maximum, 10°C). |
CompressiveStrength | To EN ISO 604/ ASTM 695, 60 N/mm². Guidance for specification option: After 24 hours at 20°C. |
Flexural strength | To EN ISO 178/ ASTM 795, 33 MPa. Guidance for specification option: After 24 hours at 20°C. |
TensileStrength | To EN ISO 527/ ASTM 638, 22 N/mm². Guidance for specification option: After 24 hours at 20°C. |
Coverage | 10 m of 15 mm wide lines, or 230 dots of 20 mm diameter. Guidance for specification option: Based on 600 ml of mixed product. |
Sustainability data
Contains Red List materials | No |
Country of material origin | United Kingdom |
Country of product manufacture | United Kingdom |
Material | Guidance for specification option: Non-shrink epoxy. |
Recyclability | 0 |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 0 % |
Third party certifications
Literature
A-FIX-WIND-SAFE Data Sheet