Verified by manufacturer 8 days ago
SL630 Max 1 (eight person/ 630 kg)
CHAS
Certificate type
Constructionline Gold
Certificate type
ISO 9001 Quality Management
Certificate type
ISO 14001 Environmental Management Systems
Certificate type
Alcumus SafeContractor
Certificate type
smas WORKSAFE
Certificate type
Constructionline
Certificate type
Range of anti-vandal passenger lifts.
Passenger lift where anti-vandal compliance is required.
Range of anti-vandal passenger lifts.
Features and benefits:
Compliance:
Length | 1400 mm 2100 mm Manufacturer guidanceCar internal dimensions. |
Width | 1100 mm 1300 mm Manufacturer guidanceCar internal dimensions. |
Uniclass | |
CAWS | X12/350 Platform lifts X12/350 Platform lifts X12/110 Vertical lifting platform systems X12/110 Vertical lifting platform systems |
System performance | To EN 81-20; EN 81-28; EN 81-50; EN 81-58; EN 70 plus EN 81-71.1. |
Lift type | Passenger lift, anti-vandal category 1. |
Drive space | Machine room-less (MRL). |
Door arrangement | Single entrance (front only).Opposite front and rear entrances.Front and side entrances (adjacent). |
Traction drive | Gearless. |
Drive position | MRL. |
Speed control | Variable voltage variable frequency. |
Control of lift drive | Manufacturer's standard. |
Roping | |
Type | Manufacturer's standard. |
Arrangement | Manufacturer's standard. |
Factor | Manufacturer's standard. |
Compensation | Manufacturer's standard. |
Lift shaft and machine room cabling and containment | |
Cable type | Manufacturer's standard. |
Containment | Manufacturer's standard. |
Rewireable installation | Manufacturer's standard. |
Concealed installation | Required. |
Electrical identification | Manufacturer's standard. |
Capacity | Eight person (630 kg). |
Clear opening | 900 x 2000 mm. Manufacturer guidanceCar entrance type: Automatic two-panel side opening. |
Car size / Capacity (w x d) | 1100 x 1400 mm. |
Car | Manufacturer guidanceInsert height requirement, up to 2400 mm. |
Shaft type | Manufacturer guidanceConsult manufacturer for options and insert requirements. |
Shaft | Manufacturer guidanceInsert requirements and drawing/ schedule reference.
|
Walls | Manufacturer guidanceConsult manufacturer for options and insert requirements. |
Flooring | Manufacturer guidanceConsult manufacturer for options and insert requirements. |
Ceiling | Manufacturer guidanceConsult manufacturer for options and insert requirements. |
Lighting | Manufacturer guidanceConsult manufacturer for options and insert requirements. |
Handrail | Manufacturer guidanceConsult manufacturer for options and insert requirements or omit. |
Mirror | Manufacturer guidanceConsult manufacturer for options and insert requirements or omit. |
Landing buttons | Round. |
Car control buttons | Round. |
Panel configuration | Manufacturer guidanceConsult manufacturer for options and insert requirements. |
Control panel finish | Manufacturer guidanceConsult manufacturer for options and insert requirements. |
Landing display | Manufacturer guidanceConsult manufacturer for options and insert requirements. |