Arbokol 2150
Verified by manufacturer 2 months ago
A hard wearing two part polysulphide sealant for structural floor joints.
Application
Suitable for use in heavily trafficked floor joints, or joints requiring a high degree of chemical resistance.
Description
A two part polysulphide sealant for structural floor joints.
Features and benefits:
- It is not recommended for joints subject to large and frequent movement or for use with potable water.
- The sealant is resistant to most alkalis and dilute acids, petrol, diesel, jet fuel and many solvents and vegetable oils.
- Arbokol 2150 burns, but will not readily ignite, so does not constitute a fire hazard.
- It can be painted, but excessive joint movement may cause the paint to crack and could induce tears in the sealant.
- Correctly applied, the sealant should not require maintenance, and has an anticipated life in excess of 20 years.
- When used in trafficked areas, or in special environments such as swimming pools, life may be reduced.
- Has good UV resistance.
- Health and safety: Some components are labelled as toxic. Use of this product should be recorded in the Project Health and Safety Plan.
General information
Color | Black Grey |
Material | Polysulphide |
Shape | Formless |
Uniclass | |
CAWS | E40/530 Sealant J21/770 Installing movement joints M40/75 Sealant movement joints M40/805 Sealant movement joints with metal edgings M40/815 Sealant movement joints M41/455 Sealant movement joints with metal edgings |
Product range |
Specification data - Polysulfide construction joint sealants
Standard | To BS EN ISO 11600. |
Sealant type | Two part polysulphide. |
Class | F-25HM.Guidance for specification option: Non-biodegradable version. F-12.5P. |
Colour | Black.Grey. |
Accessories | None. Joint backing: Closed cell foam polyethylene rod. Joint backing: Fibre-board with bond breaker tape. |
UV resistance | Good. |
Application temperature | +5 to +50°C. |
Curing time | 14 days at 20°C. |
Joint width | 6 mm (minimum); 25 mm (maximum); 50 mm (multiple applications). Guidance for specification option: Joint depth:
|
Primer | Primer for stainless steel: Arbo Primer 7781. Manufacturer guidance
|
Backing | A combined joint filler/ bond breaker such as closed cell foam polyethylene rod should always be used to ensure that the sealant only adheres to the joint faces and not the back. Guidance for specification option: Where the joint has been packed out with fibre-board, bond breaker tape should be used. |