ARDEX E 100 Additive to Improve Screeding, Rendering and Repair Mortars, and for Bonding/Slurry Grouts
Verified by manufacturer 5 months ago
ISO 14001 Environmental Management Systems
Certificate type
ISO 45001 Health and Safety Management
Certificate type
ISO 9001 Quality Management
Certificate type
Additive for bonding and slurry grouts that improves the properties of screeding and rendering mortars and can be mixed with ARDEX A 38 to produce a grouting slurry for bonded screeds.
Application
ARDEX E 100 Screed Additive can be used in bonding grouts or slurry coats, for the adhesion of bonded screeds in mortars based on ordinary Portland cements, masonry cements, cement/ lime and bonded renders, to cementitious backgrounds. Can also be used as an additive to:
- Improve workability without increasing the water content of mortars.
- Increase the compressive and tensile bending strengths of the hardened mortars.
- Improve the elasticity and reduce crack formation in mortars.
- Reduce surface dusting of screeds and renders while increasing their abrasion resistance.
- Enable the minimum thickness of the modified bonded Portland cement floor screed to be reduced to 15 mm from the recommended 25 mm minimum thickness for unmodified screed mortars.
- For internal and external use.
Description
An acrylic-based dispersion for use in screeding and rendering mortars in internal and external locations. It improves the compressive and tensile strengths, and elasticity and bond strength, of the modified mortar. The workability and plastic properties of the mortar are improved without increasing the water/ cement ratio, and early age crack formation is significantly reduced. It is also designed for use in the bonding slurry/ grout mortar mixture for ARDEX A 38 Rapid Hardening and Drying Cement for floor screeds.
Features and benefits:
- Improves the elasticity and the compressive and tensile strengths of the modified mortar.
- Improves the workability and plastic properties of the mortar without increasing the water content.
- Allows bonded cement and sand screeds to be applied at as little as 15 mm thickness.
- Reduces early age crack formation and surface dusting of screeds, whilst increasing their abrasion resistance.
- Use with ARDEX A 38 Screeding Cement as a bonding slurry/ grout.
General information
Shape | Formless |
Length | Bespoke |
Width | Bespoke |
Warranty description | Ten year |
Uniclass | |
CAWS | M10/110 Bonded cement:sand levelling screeds M10/115 Cement:sand levelling screeds M10/130 Proprietary quick drying levelling screeds M10/4 Cement:sand levelling screeds |
Specification data - Polymer admixtures
General requirements | Admixtures generally. |
TensileStrength | 2.5 N/mm² after 28 days. Guidance for specification option: Cement slurries improved with ARDEX E 100 applied onto a clean, laitance free concrete surface will have a tensile adhesion strength in excess of 2.5 N/mm² after 28 days. |
Sustainability data
Country of product manufacture | United Kingdom |
Manufacturing plant location | |
Embodied carbonA1-A3 (production stage) as defined in BS EN 15804 | 2.00 kg CO₂ eq/kg Self declared |
Recyclability | For disposal considerations see Health and Safety Datasheet at www.ardex.co.uk. |
Third party certifications
Third party certifications
ISO 14001 Environmental Management Systems
ISO 14001 Environmental Management Systems
ISO 45001 Health and Safety Management
ISO 45001 Health and Safety Management Certificate
ISO 9001 Quality Management
ISO 9001 Quality Management System
Literature
ARDEX Fast Track Floor Screed Brochure
ARDEX Datasheets Booklet
ARDEX RIBA CPD Seminars Brochure
ARDEX 10 YEAR UK PRODUCT WARRANTY
ARDEX E 100 Datasheet