BauderTEC DBR 06 Air & Vapour Control Layer
Verified by manufacturer 5 months ago
EPD
Certificate type
Bitumen air and vapour control layer (AVCL).
Application
The product is used as an air and vapour control layer in Bauder Single Ply and Cold Applied Liquid systems for installation over certain existing roof systems and all common deck substrates, including profiled metal decks, following the application of Bauder Activator-Primer or Bauder SA Bonding Primer. It is also used as the carrier membrane over insulation and timber decks with Bauder Cold Applied Liquid systems. It is not intended for direct application to concrete decks or as temporary waterproofing.
Description
A self-adhesive elastomeric reinforced bitumen air and vapour control layer, featuring an aluminium foil facing for vapour impermeability. If this product is being used in a fully bonded system then a Bauder Self Adhesive Primer will be required.
Only to be used as part of a full Bauder Single Ply or Cold Applied Liquid Waterproofing System.
General information
Color | Silver |
Finish | Foil Guidance for specification option: Top: Aluminium foil, Bottom: Peel off release film covering self-adhesive bitumen. Manufacturer guidanceTop: Aluminium foil |
Material | Bitumen |
Length | 32000 mm |
Width | 1250 mm |
Height | 0.6 mm |
Warranty description | Manufacturer guidanceA comprehensive range of guarantee options are available. Please contact your local Bauder Area Technical Manager for more information. |
Uniclass | |
CAWS | J42/110 Warm deck roof covering J42/10 Warm deck roof covering P10/310 Air and vapour control layer J42/395 Air and vapour control layer P10/60 Air and vapour control layer |
Specification data - Reinforced bitumen roofing sheets
Material | |
Bitumen modification | Elastomeric. |
Thickness (minimum) | 0.6 mm. |
Weight (minimum) | 0.6 kg/m². |
Surface finish | |
Top | Aluminium foil. |
Underside | Peel off release film covering self-adhesive bitumen. |
Colour | Silver. |
Third-party certification | BRE Green Guide A+ to B rating (depending on deck type). |
Reinforcement | 50 g/m²– aluminium/ polyester combination. |
TensileStrength | >950/50 N/mm (length). >750/50 N/mm (diagonal). |
Water vapour transmission | ≥1500. |
Reaction to fire | Class E. |
Sustainability data
Country of product manufacture | Germany |
Embodied carbonA1-A3 (production stage) as defined in BS EN 15804 | 0.05 kg CO₂ eq/m² Manufacturer guidancePlease refer to EPD on the Bauder website. EPD data can vary, please ensure that the scope and context of the EPD data is considered when comparing EPD’s for different products |
Third party certifications
Third party certifications
EPD
Environmental Product Declaration - RBM
Literature
Single Ply Membrane Systems - Bauder brochure
New Build Flat Roof Solutions - Bauder brochure
Flat Roof Design Considerations - Bauder
Cold Applied Liquid Systems - Bauder brochure
Refurbishment Flat Roof Solutions - Bauder brochure
Bauder LiquiTOP PU