COMPACFOAM - Structural Thermal Break
Verified by manufacturer 10 hours ago
CF 100
CF 100
A thermal break insulation foam.
Application
COMPACFOAM can be used in a wide range of applications where structural support and the possibility of obtaining secure fixings into the material are required.
- It can be used as a replacement for timber battens in these applications, where thermal bridging is to be reduced.
- It is particularly suited for support for door thresholds and window installation, where it is important to minimise thermal bridging.
Description
COMPACFOAM combines high compressive strength with excellent thermal insulation and low dead weight. High stiffness (2% deformation under service load) and excellent long-term stability makes COMPACFOAM a solution to many problems in insulation and lightweight applications. Available in three different density classes: CF100, CF200 and CF400.
Features and benefits:
- High compressive strength.
- Good screw pull-out resistance. Easy to drill and saw.
- Ductile material – COMPACFOAM can bear strains beyond 10%.
- Diffusion open – due to the open-cell structure, the material is also slightly air-permeable.
- Resistant to freezing.
- Excellent water absorption capacity – does not absorb more than 5–10% moisture.
General information
Color | White |
Material | Polystyrene |
Shape | Rectangle |
Length | 1170 mm 980 mm 700 mm |
Width | 980 mm 660 mm 400 mm |
Height | 25 mm 50 mm 75 mm |
Uniclass | |
CAWS | E40/440 Load transfer systems E40/445 Insulating load transfer systems E40/445 Insulating load transfer systems |
Product range |
Specification data - Expanded polystyrene (EPS) boards
Standard | To EN 13163. |
Fire performance | Reaction to fire to 13501-1, Class E. Fire behaviour to DIN 4102-1, Class B1. |
Compressive strength (minimum) at 10% compression | 2560 kPa. |
Thermal conductivity (maximum) | 0.0387 W/m·K. |
Water permeability | 5% (maximum) by volume.Manufacturer guidanceWater absorptive capacity during complete submersion. |
Water vapour permeability | 25 μ. |
Thickness | 50 mm.75 mm. |
Face size (nominal length x width) | 1170 x 980 mm. |
Sustainability data
Contains Red List materials | No |
Country of material origin | Europe |
Country of product manufacture | Europe |
Material | Polystyrene |
Expected Life | Lifetime |
Literature
COMPACFOAM Technical Data Sheet
Case studies
EnerPHit Dublin Residence Features Partel’s Structural Insulation