Compare

CorruSec SR3 (C5) Rated Security Fencing

Name: CorruSec SR3 (C5) Rated Security Fencing
Brand: Zaun Limited
SKU: tqZAjhBNttRu8iYZJY7NTr

Verified by manufacturer 4 months ago

CorruSec SR4 (D10) Rated Security Fencing

High security fencing system, providing a ten minute delay.

Jump to:

Application

Suitable for protecting assets on sites, including:

High security, patent pending perimeter fencing solution, tested with a minimum delay time of ten minutes.

Features and benefits:

Unique configuration of welded mesh panels, which have been tested to defeat a wide range of attack methods, including hand and power tools.
Provides good visibility for use with CCTV camera systems.
Can be used in conjunction with a variety of fence security toppings.
Concealed fixings.
Features a maximum corrugated infill of 2.4 m high.
Manufactured in accordance with BS 1722, Part 14.

Uniclass	Ss_25_14_61_51 Metal mesh panel fencing systemsPrimary
CAWS	Q40/125 Open mesh steel panel general purpose fencing Q40/126 Open mesh steel panel security fencing Q40/27 Open mesh steel panel general purpose fencing Q40/30 Proprietary fencing Q40/430 Proprietary fencing

Standard	To BS 1722-14, ISO 12944.
Posts	80 x 80 mm square hollow section (SHS) posts. Guidance for specification option: Centres: 2540 mm.
Panels	HiSec Super 10 flat front panels, HiSec 3/5/10 back panel and a corrugated HiSec 3/5/10 mesh panel in the centre. Guidance for specification option: Each flat panel features a 76.2 x 12.7 mm mesh configuration with 4 mm horizontal and 10 mm vertical wires. All three layers are bolted together using bolts fixed into place in a grid pattern throughout the combined fence panel.
Fence topping	- Manufacturer guidance Consult manufacturer and insert requirements.

Height	2800 mm. Manufacturer guidance Additional heights available upon request.
Applied finishes	Galvanized and polyester powder-coated (PPC).
Colour	Guidance for specification option: Insert RAL colour requirement.
Fixing	Base plated, bolt down. In ground. Through bolts. Washers. Nuts and anti tamper security fxings.
Panel fixings	Panel assembly is fixed to the posts using 80 mm full-height clamp bars with fixing centres of 228.6 mm.
Gates	Guidance for specification option: Consult manufacturer and insert requirements.
WireDiameter	10 mm / 4 mm. Guidance for specification option: (Attack face, Non-Buried) Vertical x Horizontal. 3 mm / 3 mm. Guidance for specification option: (Corrugated) Vertical x Horizontal. 4 mm / 4 mm. Guidance for specification option: (Buried) (Inner Layer) Vertical x Horizontal.
Width	2515 mm.
Mesh size	76.2 x 12.7 mm.