Danfoss Icon™ Thermostat Controller - Thermostat Controller - UFH
Verified by manufacturer today
Danfoss Icon™ Basic (Wired) - 088U2102
Danfoss Icon™ Basic (Wired) - 088U2102
Thermostat controller with IP20 protection, for hydronic underfloor heating applications.
Application
For the control of hydronic floor heating and cooling systems (for individual room control), in domestic applications.
Description
Thermostat controller with IP20 protection, which can be configured as a wired or wireless system.
Features and benefits:
- Easy installation and set-up using the pre-defined application and app.
- Available in a basic and an advanced model.
- Available in multiple language variations.
- Automatic balancing (PWM+), which ensures that the hydraulic balancing of the system is done by the master controller based on the actual room demand.
- Requires no pre-setting on the manifold.
- On/ off control possibility.
- NO (normally opened)/ NC (normally closed) actuator functionality.
- Cooling change over.
- Possibility to combine wired and wireless thermostats in same installation.
- Can connect to up to 15 thermostats.
- App functionality for iOS and Android devices.
- RoHS and WEEE compliant.
General information
Color | Black |
Shape | Rectangle |
Length | 54 mm Manufacturer guidanceDepth. |
Width | 330 mm |
Height | 120 mm |
Uniclass | |
CAWS | T90/485 Thermostats |
SKU Code | 088U2102, 088U2112 |
Specification data - Wet underfloor heating zone controllers
Description | Thermostat controller with IP20 protection, for hydronic underfloor heating applications. |
Manufacturer | Danfoss Ltd. |
Product reference | Danfoss Icon™ Thermostat Controller. |
Accessories | Not required. 088U1131 - Danfoss Zigbee repeater. 088U2140 - Icon2™ 24 V conversion module. 088U2141 - External antenna. |
Application | Room. |
Equipment interconnectivity (wired) | Wiring required. |
Communications | Manufacturer guidanceWireless communications. |
Operating temperature range | 0–50°C (ambient temperature range). Guidance for specification option: Storage temperature: -20 to +65°C. |
Voltage | 230 V a.c. Guidance for specification option: Supply voltage: 220–240 V. 50/60 Hz. |
Ingress protection (minimum) | IP20. |
Power consumption | <50 W. Guidance for specification option: Excluding use of PWR 1 and PWR 2 outputs. Maximum power consumption per actuator output: 2 W. |
Standby power | 230 V actuators: <2 W. |
TemperatureSensorType | External sensor, PT 1000 (Danfoss ESM 11). |
Protection class | Class II. |
Colour | Black. |
Power | <2.5 mW. Manufacturer guidanceTransmission power. |
Included features | Support for two pipe systems. |
Sustainability data
Recyclability | Must be disposed of as electronic waste |
Literature
Literature type
Hydronic product overview
Danfoss Icon MC datasheet