Compare

Dominator with commissioning set - Z3000 - Remote Mount

Name: Dominator with commissioning set - Z3000 - Remote Mount
Brand: Crane Fluid Systems
SKU: q2mnvkeLfXb8jqahHEDhPA

Verified by manufacturer 7 days ago

Z3004 DN15/15

Crane Fluid Systems

A pre-assembled valve set with commissioning set and strainer/ drain.

Jump to:

+44 (0)1473 277300 Website

Application

Suitable for group two liquids only.

Description

A control valve set with commissioning set and strainer/ drain.

Features and benefits:

Flow management system for fan coil units.
Combines the essential control components and connecting pipework into one compact, fully assembled unit ready to connect.
The Z3000 is compact and lightweight.
The bypass valve unit comprises two T Ball valves.
The strainer unit has integral filter and pressure test point, plus drain cock / vent facility.
Balancing valve is of proven high quality and accuracy.
With the exception of the strainer the Dominator valve is a maintenance free device.

General information

Color	Bronze
Material	Bronze
Length	Bespoke
Width	Bespoke
Height	Bespoke

Uniclass	Pr_65_54_40_16 Irrigation control valvesPrimary Pr_65_54_95_64 Pressure-regulating valves

Specification data - Irrigation control valves

Standard	To BS EN ISO 9001-2008, BS 7350:1990 type 3, BS EN 1982, BS EN 12165, BS EN 12164.
Regulating function	Flow rate.
Connections	Threaded. Guidance for specification option: Depending on model the connections will be suitable for connection with pipe threaded to R1/2, R3/4 or R1. Manufacturer guidance Kits are available to adapt to other common piping systems. Contact Manufacturer for further information.

Inlets/outlets diameter	15, 15 mm.
Dimensions	200 x 80 mm.
Weight	1.65 kg.
Torque	40 Nm (4), 35 Nm (7). Manufacturer guidance Union torque Nm (4), Strainer bonnet torque Nm (7).
Thread size	R 1/2, R 1/2. Manufacturer guidance System side thread size, Load side thread size.
PressureRating	PN16.
Operating temperature range	-10 to +120°C.
Materials	Bronze BSEN 1982 CC491K, DZR Brass BS EN 12165 (CW602N), Brass BS EN 12164 (CW602N), KL INGER C4500, Nitrile. Guidance for specification option: Bypass valve, Strainer: Bronze; Union, Pressure tapping, Drain cock, Strainer bonnet: Brass; Strainer gasket: Klinger; O-rings: Nitrile.
Strainer	- Manufacturer guidance This module is fitted with a stainless steel perforated screen with drain-cock / vent facility and pressure tapping point. The screen may be removed for cleaning by undoing the bonnet. Replacement screens are available. It is recommended that the gasket and ‘O’ rings are replaced during routine servicing. Re-tighten the bonnet to the recommended torque. The strainer may be back or forward flushed by setting the bypass valve to the appropriate mode and loosening the drain-cock about two to three turns. The drain cock has provision for attaching a drain hose. Avoid over-tightening the drain-cock, which requires only low torque to seal. The load can also be flushed in the back-flushing mode. Monitoring the pressure drop across the load can be facilitated by taking a reading across FODRV (upstream - red tapping point) and the tapping point provided in the strainer.
ValveOperation	- Manufacturer guidance All balancing valves require four clockwise turns of the ‘Microset’ hand-wheel from fully open to closed position. A highly visible window indicates the number of complete turns of the hand-wheel from fully open (four) to closed (zero) and a numbered ring indicates the division of each turn in tenths from zero to nine. A total of 80 distinct settings are available. The ‘Microset’ hand-wheel can be removed and repositioned on the valve spindle in any one of six positions to allow ease of scale reading.
Orientation	- Manufacturer guidance The ‘Dominator’ has two unions fitted to allow for orientation and handing of the FODRV, strainer and bypass valve.
Preparation	- Manufacturer guidance Steel tube – cut square and de-burr internally and externally, thread to BS21 and fit to Dominator using PTFE tape to BS7786:1995 or other recommended jointing compound. Whilst fitting pipe and / or adapters, appropriate sized wrenches should be used to take the reaction force generated on the valve body when making the joint.
Installation	- Manufacturer guidance The valve may be installed directly or remotely to a load (typically a Fan Coil Unit). The direction of flow should be such that the return from load enters the ProBalance (FODRV) on the flow measurement side.
Flow capacity	0.58 Kvs, 0.53 Kv. Guidance for specification option: FODRV (Kvs), Total (Kv). Manufacturer guidance Flow coefficient Kv.
Third-party certification	BSI.

Sustainability data

Country of product manufacture	United Kingdom
Material	Bronze
Manufacturing plant location	46 Wilbury Way, Hitchin SG4 0UD, UK
Recyclability	Recyclable Guidance for specification option: Recycle locally, consult manufacturer for details.
Expected Life	20 year