EHI/ EHI GF
Verified by manufacturer over a year ago
EHI
EHI
One coat breathable through coloured mineral render for use on the ParexTherm mineral insulated render system.
Application
For use with the ParexTherm mineral insulation systems to provide the final decorative and weatherproof finish.
Description
A coloured mineral based render in powder form ready to mix with water. Available in two grades standard and fine grade to create a range of finishes. This product is intended for use with the ParexTherm mineral insulation systems to provide the final decorative and weatherproof finish.
Suitable for:
- Exterior Insulation Façade System (EIFS) - ParexTherm mineral render system.
- To blend in with the ParexTherm mineral system EHI/ EHI GF can be applied directly to suitably prepared masonry and concrete substrates. Contact Parex for further advice.
- ParexDirect Mineral render system.
Unsuitable for:
Exposed facades or parts of facades at an angle of more than 5° from the vertical. A backward incline may affect water run-off and may have a tendency to hold moisture.
Finishes:
- Fine scraped – EHI GF.
- Medium scraped – EHI.
- Spray textured – EHI/ EHI GF.
- Smooth spray textured – EHI/ EHI GF.
- Sponge float finish – EHI GF.
- Trowel float finish – EHI GF.
For additional information on the range of finishes consult the Parex literature referenced Textured Finishes.
General information
Color | Other Guidance for specification option: Range of 48 standard colours are available. Special colours available. |
Finish | Smooth Guidance for specification option: Spray textured. Manufacturer guidance
For additional information on the range of finishes consult the Parex literature referenced Textured Finishes. |
Material | Cement Lime Polymer |
Shape | Formless |
Uniclass | |
CAWS | M20/130 Cement:sand (air entrained) M20/160 Proprietary cement gauged render M20/5 Cement:sand (air entrained) M21/20 External wall insulation system . . . . . . M21/210 External wall insulation system |
Product range |
Specification data - Polymer-modified renders
Third party certification | British Board of Agrément (BBA) certified. |
Grain size | Refused passing through sieve at 0.08 mm – 70 to 80%. Refused passing through sieve at 1.25 mm – 10 to 25%. |
Colour | Guidance for specification option: Range of 48 standard colours are available. Special colours available. Manufacturer guidanceContact Parex Ltd for colour samples. Non-standard colours are available at no cost option and should be approved prior to ordering. |
Pack size | 30 kg bag. |
Composition | A white powder, based on cement, hydrated lime, micronized vinyl copolymers, calcareous and siliceous sands, mineral pigments and specific admixtures. |
Preparation | Water ratio: 6.9–7.5 L per 30 kg bag. Manufacturer guidance(Product). |
Accessories | None. Algirex. Axel 3000. Mesh, beads and profiles for mineral renders. Parex Profiles. |
Thickness | Guidance for specification option: Dependent upon application and desired finish - refer to product data sheet. |
Technical characteristics, other | MVA: 1.12 ± 0.05, pH powder: 12.5 ± 0.5%, water retention: 93 ± 2%. |
Finishes | Medium scraped. |