Verified by manufacturer 25 days ago
Electronic self-priming multi-impeller water boosting system for domestic water boosting, rainwater reuse, ground water, gardening and irrigation and watering small gardens in residential systems.
Type of pumped liquid : Clean, free from solid or abrasive substances,
non-viscous, non-aggressive, non-crystallized and chemically neutral.
Liquid temperature range: 0°C to +35°C (domestic use); 0°C to +40°C (other uses).
Electronic self-priming multi-impeller water boosting system for domestic water boosting, rainwater reuse, ground water, gardening and irrigation and for watering small gardens in residential building service.
Features and benefits:
Color | Green |
Material | Polymer Guidance for specification option: Technopolymer. Stainless steel Rubber |
Shape | Rectangle |
Length | 236 mm |
Width | 263 mm |
Height | 439 mm |
Warranty description | Two year |
Uniclass | |
CAWS | S90/470 Close-coupled in-line pumps |
General requirements | Pumps generally |
Arrangement | Floor mounted single, horizontal.Floor mounted single, vertical.Floor mounted double, horizontal.Floor mounted double, vertical.Wall mounted, single.Guidance for specification option: Special accessories required, see below. Wall mounted, double.Guidance for specification option: Special accessories required, see below. |
Duties | |
Operation | Guidance for specification option: Insert requirements. |
Flow rate | Up to 4.8 m³/h (70 L/m).Guidance for specification option: Consult manufacturer's literature for flow/head tables. |
Motor | |
Nominal voltage | Single phase 230 V a.c. |
Frequency | 50 Hz. |
Motor and impeller speed (maximum) | Manufacturer's standard.Guidance for specification option: Number of impellers: Three. |
Speed control | Variable. |
Casing material | Technopolymer.Guidance for specification option: Motor sleeve: stainless steel AISI 304. O-ring: NBR. Motor body: PP OMO 30% GF. Mechanical seal: DISC PA 6.6 30% GF. Mechanical seal: Carbon impregnated resin / ceramic / NBR. Diffuser: NORYL. Impeller: NORYL. Suction body: PP OMO 30% GF. Insert 1": Brass. Shutter: Spring stainless steel AISI 303. Self-priming shutter: POM. 1" plug: PP OMO 30% GF. Non return valve: Technopolymer / rubber / steel. 1" 1/4 plug: PA 6.6 30% GF. Heat sink: Brass. Delivery body: PP OMO 30% GF. Insert 1": Brass. Vessel 1 L: Technopolymer / rubber. Flowmeter wheel: POM. Pressure sensor body: Technopolymer. 1" plug: PA 6.6 30% GF. |
Accessories | None.e.sytank.Guidance for specification option: Tank, designed to best join with e.sybox, equipped with:
Capacity 480 litres net with expansion available on three sides. e.sywall.Guidance for specification option: Kit includes brackets, screws, plugs and two accessories for vibration absorption. e.sylink.Guidance for specification option: Accessory equipped with wireless 802.15.4 interface, created to enable e.sybox to use four digital inputs (pressure switch, float, etc.), control two relay outputs (alarms, etc.) with the possibility of connecting an auxiliary pressure sensor. USB cable included. e.sylink kit.Guidance for specification option: As e.sylink plus 8DIN power box, power supply and three cable glands. e.sylink & pressure switch kit.Guidance for specification option: As e.sylink kit plus low pressure switch kit. |
Integral accessories | e.sydock. Guidance for specification option: Because of the four hydraulic configurations available, installation is faster easier and more flexible. All required interfaces for connection to the plant are included. Quiet operation is ensured by the anti-vibration feet included. e.sytwin. Guidance for specification option: As e.sydock but for twin pump groups. |
Third-party certification | WRAS approved. |
Pressure | Maximum operating pressure: 7.5 bar. |
Motor | Protection class: IPX4. Guidance for specification option: Stainless steel motor jacket. Motor shaft in AISI 303 stainless steel. The efficiency is comparable to the IE5 efficiency class (according to internal laboratory tests). |
Head | Up to 55 m. Guidance for specification option: Consult manufacturer's literature for further details. |
Temperature | Liquid temperature: 0°C to +35°C (domestic use); 0°C to +40°C (other use). |
Performance | Maximum suction depth: 8 m. |
Contains Red List materials | No |
Country of material origin | Italy |
Country of product manufacture | Italy |
Esybox Line - Electronic Water Boosting System
Esybox Line Esytwin - Electronic Water Boosting System
Esytank Pro 1000 AB - 1000AG - Water Boosting System with Water Tank
Esytank Pro 1250 AB - 1250AG - Water Boosting System with Water Tank
Esytank Pro 1500 AB - 1500AG - Water Boosting System with Water Tank
Esytank Pro 65AB - 750AG - Water Boosting System with Water Tank
Inline Glanded Pumps ALM/ ALP - ACS-Certified In-line Pumps
Inline Glanded Pumps ALME/ ALPE - Electronic In-line Pumps
Inline Glanded Pumps CM - In-line Port Circulation Single Pump
Inline Glanded Pumps CM-G - Electronic Circulation In-line Pump