Excel® FM Warm Roof Flame Free Mechanically Fixed Single Layer System - Timber Roof Deck / Profile Metal Deck

Vernis SA Primer.

Guidance for specification option:

Fast-drying canister primer ideal for use with flame free, self-adhesive reinforced bitumen waterproofing systems. Vernis SA primer provides improved simple and effective adhesion on self-adhesive reinforced bitumen membrane waterproofing systems.

VAP ALU ADH.

Guidance for specification option:

VAP-ALU ADH is an air and vapour control layer (AVCL) with sand on the surface and a self adhesive undersurface.

An AVCL low permeability membrane used as part of a system to control the movement of air, water vapour and heat leakage from within the building. Can also be used as base or underlayer in a multi-layer waterproofing system.

Hytherm FM.

Guidance for specification option:

Hytherm FM PIR is a high performance rigid PIR insulation for warm roofs (flat board or tapered) under mechanically fixed single-ply membranes. It is designed to provide optimum stability and structural integrity in warm roof constructions with mechanically-fixed single ply waterproof membranes on concrete, timber or metal decks.

Hyrastik EVO.

Guidance for specification option:

Single-component, moisture-curing polyurethane insulation adhesive.

Stickflex PY Peel Stop.

Guidance for specification option:

STICKFLEX PY Peel Stop is a self-adhesive, polyester reinforced 120g SBS elastomeric modified bituminous waterproofing membrane. Both surfaces of the membrane are covered with film. To be used as a peel stop membrane to resist wind load on upstands, skirtings, perimeters and penetrations. STICKFLEX PY Peel Stop is suitable for use in Neo-bitumen and Excel FM Flame Free warm roof waterproofing systems.

Excel Capping Sheet.

Guidance for specification option:

Reinforced Alpa Polymer, modfied self-finished bitumen waterproofing membrane. 

• Width: 1 m.
• Length: 8 m.
• Weight: 5 kg/m².
• Surface: top: Mineral slate or granules 100–1200 g/m²; bottom: thermofusible film 10 g/m².
• Reinforcement binder: Alpa – mix 3800 g/m².
• Cold bending test: ≤-14°C.
• Softening point: ≥120°C.
• Tensile strength: length 600 N/50 mm; transverse >600 N/50 mm.
• Elongation at break: length >35%; transverse >35%.

Force 4000 Flame Free Capsheet.

Guidance for specification option:

FORCE 4000 Flame Free is a stabilised polyester reinforced, SBS elastomeric modified bitumen waterproofing membrane. Capsheet in FORCE NEO warm roof, self adhesive, multilayer bitumen membrane roof waterproofing system.

Stickflex PY Angle Reinforcement.

Guidance for specification option:

STICKFLEX PY is a self-adhesive, polyester reinforced 120g SBS elastomeric modified bituminous waterproofing membrane. Both surfaces of the membrane are covered with film. Angle reinforcement for application on upstands, as detail and perimeter detail reinforcement and as pipe and other detail reinforcement. STICKFLEX PY is suitable for use in bitumen and single ply warm roof waterproofing systems.

Stickflex PY Angle Reinforcement.

Guidance for specification option:

STICKFLEX PY is a self-adhesive, polyester reinforced 120g SBS elastomeric modified bituminous waterproofing membrane. Both surfaces of the membrane are covered with film. Angle reinforcement for application on upstands, as detail and perimeter detail reinforcement and as pipe and other detail reinforcement. STICKFLEX PY is suitable for use in bitumen and single ply warm roof waterproofing systems.

Axtrim.

Guidance for specification option:

• Manufactured from extruded aluminium alloy to BS 1474, Quality 6065/ T6 (AIMgSi 0.5 F22).
• Roof edge trim brings a neat finish to flat roof waterproofing.

Axtrim aluminium termination bars.

Guidance for specification option:

• Axtrim aluminium termination bars are manufactured from extruded aluminium alloy to BS 1474, Quality 6065/ T6 (AIMgSi 0.5 F22).
• Aluminium termination bars will not rust and are not affected by atmospheric pollution.
• They are colourfast and maintenance free, once installed.

Axtrim GRP termination bars.

Guidance for specification option:

• Axtrim GRP termination bars are manufactured from pultruded GRP (glass reinforced polyester).
• It is UV protected and has low coefficient of thermal expansion.
• GRP termination bars will not rust and are not affected by atmospheric pollution.
• They are colourfast and maintenance free, once installed.

Rainwater outlets.

Guidance for specification option:

• Axter rainwater outlets are manufactured from 0.7 mm stainless steel in a choice of diameters, with a factory bonded flange, if required to provide a bonding area with the relevant Axter waterproofing system.
• SBS bitumen membrane flange 500 mm square, suitable for use with the full range of Axter reinforced bitumen membrane (RBM) and hot melt structural waterproofing systems.
• On the Dual Outlet, a bitumen flange is fitted at AVCL level. 
• PVC membrane flange 350 mm square, suitable for use with Axter Ecoflex/ Ecoline PVC single ply waterproofing systems.

Sump outlet.

Guidance for specification option:

• Specifically designed for through walls applications or parapets, where a high flow rate is required and are supplied with the Hyflow leaf guard as standard.
• AXTER sump outlet has a flow rate of 6.1 L/s.
• As recommended by UK design standard BS EN 12056: 3-2000, with a water depth of 35 mm.

Wide parapet outlet.

Guidance for specification option:

• Used where an increased flow rate (2.02 L/s) is required.
• A 90° pipe angle and extra-large leaf guards are also available to be used with this unit.

Universal leaf guard.

Guidance for specification option:

• The solid stainless steel universal leaf guard clamps to the inside of the outlet stem.
• Suits all sizes of rainwater outlets.

Parapet leaf guard.

Guidance for specification option:

The solid parapet leaf guard is attached to the inside of the outlet and is fully adjustable to fit all three parapet outlet sizes.

Hyflow leaf guard.

Guidance for specification option:

• The 1.4301 (304) grade stainless steel Hyflow leaf guard is designed to be used with Axter rainwater outlets.
• Its use increases flow rate by over 50% compared to standard leaf guards.

Self Protected Excel Capping Sheet.

Lightning conductor clips.

Guidance for specification option:

• Axter lightning conductor clips provide resilience and repellent characteristics, keeping them from fading and going brittle in sunlight.
• Simple to install and are supplied as a one-piece unit.
• Colour is dark grey.

Rooflights/ access hatches.

Guidance for specification option:

Consult manufacturer for details.

Solar PV Flex.

Guidance for specification option:

• Flexible thin-film photovoltaic system combining CIGS (Copper Indium Gallium Selenide) panels bonded to Axter waterproofing membrane Axter SOLAR PVFLEX flexible.
• Thin-film photovoltaic system is a lightweight integrated solution, where the solar PV module and the waterproofing are combined, and the PV module is secured to the roof system without the need for mechanical restraint and penetration of the waterproofing layer.

Interim and final roof inspections by AXTER Quality Assurance (QA) personnel. Final roof inspections by AXTER Quality Assurance (QA) personnel are mandatory for guarantee application.