Flowcoat SF41 SR LE System - Epoxy Resin Coating
Verified by manufacturer 8 months ago
Pigmented, high-performance, solvent-free epoxy anti-slip system with enhanced UV resistance and low VOC emissions.
Application
Suitable for use as a line marker in demarcation areas and may also be used for internal deck car park topcoats.
Suitable for use in areas such as factories, warehouses, plant and storerooms where high resistance against chemical attack is required.
IMPORTANT: All specification information must be checked against the individual site requirements. Flowcrete advises that specifications are confirmed with their technical experts.
Description
A solvent-free, chemical-resistant, epoxy resin coating that can deliver an anti-slip profile by inclusion of aggregates between coats.
The product is hard wearing against sustained vehicle traffic, as well as chemical and abrasion resistant.
Features and benefits:
- M1 Certified.
- Low VOC content and emissions.
- Chemical-resistant.
- Decorative.
- Slip-resistant.
- Wear-resistant.
- Hygienic.
- CE marked.
General information
Color | Blue Green Grey Red Beige |
Finish | Gloss |
Material | Resin |
Height | 1.0 mm |
Warranty description | Manufacturer guidanceTwo to five years. |
Uniclass | |
CAWS | M12/10 Resin flooring M12/110 Resin flooring |
Specification data - Resin flooring systems
Substrate | |
Testing | Moisture content of substrates dry to 83% RH. |
Preparation | Preparation of substrate. |
Primer | Flowprime LE100.Guidance for specification option: at 0.30 kg/m² (only required for weak substrates). Hydraseal DPM as a primer. |
Resin flooring | Flowcoat SF41 LE, scattered Natural Quartz.Guidance for specification option: at 0.30 kg/m², scattered with natural quartz 0.3–0.8 mm at 1.5 kg/m². |
Surface treatment | Flowcoat SF41 LE.Guidance for specification option: at 0.7–0.8 kg/m². |
Certification | CE Marked. |
Fire resistance | To EN 13501-1, Bfl-s1. |
Wear resistance | To EN 13892-4, AR0.5 (<50 µm). |
Bond strength | To EN 13892-8, B2.0 (≥2 MPa). |
Shore Hardness - D | To EN ISO 7619-1, D ≈ 80. |
Impact resistance | To EN ISO 6272 IR10, (10 Nm). |
Temperature resistance | Tolerant of sustained temperature up to 50˚C. |
VOC emissions | Indoor Air Comfort GOLD: Pass. Guidance for specification option: M1: Pass | AGB/AgBB: Pass | BREEAM Int.: Exemplary Level. |
Slip resistance | To EN 13036-4, >40 (dry); >40 (wet). Guidance for specification option: Low slip potential. |
Cure time | Light traffic: 24 hours. Guidance for specification option: These figures are typical properties achieved in laboratory tests at 20°C. |
Finish options | Gloss. |
Colour options | Goosewing Grey 222. Light Grey 232. Window Grey 2012. Mid Grey 280. Sand Beige 326. |
Thickness | ~1.0 mm. |