Halifax Drain Below Ground Cast Iron Pipe
Verified by manufacturer 14 hours ago
BSI Kitemark
Certificate type
Below ground cast iron drain pipe, fully compliant with BS EN 877:1999 + A1:2006 and BS EN 877:2021. BSI Kitemark achieved on above and below-ground systems.
Application
- Large commercial projects
- Hospitals
- Prisons
- High rises
- Multi-storey car parks
- Shopping complexes
- Hotels
Description
The Halifax Drain Below Ground Cast Iron Pipe features a two-part grey epoxy coating on its exterior. The pipe is part of the Halifax Soil & Drain system, which is a socketless, mechanically jointed cast iron drainage and wastewater system.
The Halifax system has third-party certification from BSI Kitemark (Cert No. KM 684754), confirming its compliance with the BS EN 877 standard. All Halifax products are CE marked and comply with the EU Construction Products Regulations (CPR 305-2011). BS EN 877:2021 has a higher technical requirement for performance testing. Hargreaves Halifax Soil & Drain products have met and exceeded these requirements
Pipe diameters:
- 100 mm
- 150 mm
- 200 mm
- 250 mm
- 300 mm
Pipe lengths:
- 3000 mm
Fittings available:
- Ductile iron couplings (with electrical continuity)
- Halifax push fit couplings
- Short radius bends
- Long radius bends
- Heel rest bends
- Long radius bends with access door
- Medium radius bends
- Equal/ unequal branches
- Double branches
- Long tail branches
- Access pipes
- Pipe tapers
- P traps
- Blank ends
- Puddle flanges
- Round inspection chambers
- Rectangular inspection chambers
- Bellmouth gully
- Brackets
- Sundries
General information
Color | Grey |
Finish | Gloss |
Material | Cast iron |
Shape | Circle |
Length | 3000 mm |
Width | 100 mm 150 mm 200 mm 250 mm 300 mm |
Warranty description | Other |
Uniclass | |
CAWS | R12/334 Pipes, bends and junctions – cast iron – grey |
Specification data - Grey cast iron below-ground drainage pipes and fittings
Standard | To BS EN 877. |
Sizes (nominal) | 100 mm.150 mm.200 mm.250 mm.300 mm. |
Corrosion protection | |
External | Two-part epoxy.Guidance for specification option: Grey. Manufacturer guidanceThe external surface of the drain pipes are coated to a minimum average of 170 microns. |
Internal | Two-part epoxy.Guidance for specification option: Yellow. |
Jointing type | Ductile iron couplings.Push fit couplings.Ductile iron couplings with continuity. |
Integral accessories | Short radius bend.Guidance for specification option: 45°, 30°, 15°. Long radius bend.Guidance for specification option: 88°, 22°. Long radius bend - door back.Guidance for specification option: 88°. Long radius bend - heel rest.Guidance for specification option: 88°. Medium radius bend.Guidance for specification option: 45°. Bend - longer tail.Guidance for specification option: 88°. Single equal and unequal branch.Guidance for specification option: 69°, 45°. Single branch - radius curve.Guidance for specification option: 88°. Single branch - radius with access.Guidance for specification option: 88°. Double branch.Guidance for specification option: 69°, 45°. Double branch - radius curve.Guidance for specification option: 88°. Access pipe - round door.Access pipe - rect door.Pipe tapers.Coated adjustable bracket.P trap with bottom access.Plain P traps.Blank ends.Blank ends - drilled and tapped.Bellmouth gully inlet.Bellmouth gully with secured grating.Gully inlet.Solid cover.Plain grating.Puddle flanges.Inspection chamber - 2 branch - round door.Inspection chamber - 2 branch - rect door.Inspection chamber - 4 branch - rect door. |
Sustainability data
Contains Red List materials | No |
Material | Cast iron |
Recyclability | 100% |
Expected Life | 100 year |
Third party certifications
Literature
2023 / 2024 Trade Price List
Halifax Soil & Drain Technical Guide
Case studies
Queensway Tunnel, Merseyside - Halifax Drain BS EN 877