Helifix InSkew Warm Roof Batten Fixing

Stainless steel helical, self-tapping, structural batten fixing for warm roof construction, designed to support the counter battens against sliding load and wind loading on timber pitched roofs and walls.

Features and benefits:

• Produces a self-tapping action which avoids insulation compression, batten bounce and splitting of timbers down to 35 mm wide.
• Provides exceptional, tested, holding power in tension, compression and bending.
• Installation is with a conventional hammer or SDS drill power-driver.
• The headless flush fixing minimizes cold bridging.
• Slim, self-tapping, helical stainless steel fixing.
• Complies with Building Regulations Part L.
• Recommended by leading insulation manufacturers.
• Hammer or power driven, normally without pre-drilling.
• Designed to withstand the structural loads – both the roof weight and wind suction.
• Rapid, free, in-house design service available.
• Written specifications covered by Helifix Professional Indemnity insurance.
• Full technical data available; Independently tested by TRADA.