High Build Epoxy Top Coat Floor Coating - High Build Epoxy Floor Coating
Verified by manufacturer 4 months ago
DoP
Certificate type
Two-component solvent-free epoxy resin-based floor coating developed to provide protective & decorative properties to concrete, steel and other substrates.
Application
As a waterproof, tough, chemical-resistant floor coating or as an internal lining for concrete or steel storage tanks containing oils, chemicals, water etc. Epoxy Top Coat is particularly suitable for chemical bunds.
Epoxy Top Coat is suitable for use in:
- Plant rooms
- Food preparation areas;
- Breweries;
- Abattoirs;
- Bottling factories;
- Manufacturing areas;
- Industrial units;
- Warehouses;
- Aircraft hangers.
Consult manufacturer's literature for relevant mixing, surface preparation and application instructions.
Description
After mixing together, an easily applied chemical and abrasion-resistant finish is produced.
Features and benefits:
- Solvent-free, low odour.
- Provides a fully sealed surface with good chemical resistance.
- High level of adhesion to concrete and steel.
- High build.
- Tough and durable.
- Easily applied.
- Hygienic and easily cleaned.
- Can be applied via brush, short piled roller, or airless spray.
- If a non-slip finish is required, broadcast an appropriate Silica Sand immediately after the first coat - consult manufacturer for further details.
General information
Color | Grey Red Manufacturer guidanceComponent A: Grey; component B: Milky white, Finish: colour (when cured): Grey. |
Finish | Gloss |
Material | Liquid Guidance for specification option: Solvent free epoxy resin |
Shape | Other |
Length | Bespoke |
Width | Bespoke |
Height | Bespoke |
Uniclass | |
CAWS | M60/180 Floor coating |
Product range |
Specification data - High-build floor coatings
Colour | Grey. |
Specific gravity | 1.6. |
Shelf life | 12 months. |
Pot life at 10°C and Relative Humidity (RH) of 40% | 60 minutes. |
Application rate - First coat over primer | 0.25 kg/m². |
Application rate - Further protective coats | 0.25 kg/m². |
Application method | Brush, roller or squeegee. |
Minimum application temperature - substrate | +5 (and rising) °C. |
Maximum application temperature - air | +30 °C. |
Odour | Slight ammonia. |
VOC content | Below 100 g/L. |
Membrane thickness - First coat over primer | 0.15 mm. |
Membrane thickness - Further protective coats | 0.15 mm. |
Impact resistance - Class 2 | 14 Nm. |
Resistance to dilute acid/alkaline | Excellent. |
Shore Hardness - D | 82. |
Slip resistance | F. |
Sustainability data
Contains Red List materials | Yes |
Country of material origin | United Kingdom |
Country of product manufacture | United Kingdom |
Material | Liquid Guidance for specification option: Solvent free epoxy resin |
Recyclability | 0 |
Third party certifications
DoP
NewCoat 701-HB DoP
Literature
Newton NewCoat 701-HB
Case studies
Warwick Court Redevelopment, London